A comparison between new European technical standards and dynamic simulation tools for chiller modelling. Issue 1 (1st December 2022)

• Record Type: Journal Article
• Authors: Bianco Mauthe Degerfeld, F.; De Luca, G.; Ballarini, I.; Corrado, V.
• Is Part Of: Journal of physics. Volume 2385 Issue 1(2022)
• Publication Date: 2022-12-01
• Subjects: Physics -- Congresses; 530.5
• DOI: 10.1088/1742-6596/2385/1/012021
• Languages: English
• ISSNs: 1742-6588

Abstract

Abstract: In the last years, new technical standards for the assessment of the energy efficiency of technical building systems were developed by the European Committee for Standardization (CEN). These procedures were conceived as to combine the easiness of the calculation methodologies and their related assumptions with a sufficient level of accuracy. While the former objective is often achieved, the latter is a challenging task as the procedures sometimes fail to simulate in a proper way the actual performance of the technical systems. On the other hand, the detailed procedures applied by detailed dynamic energy simulation tools are more precise and complex; however, for their application, they need a wide range of input data that are often hard to collect. For this reason, simplified procedures are now commonly applied, above all in the case of existing buildings. Nevertheless, these procedures need to be deeply analysed and validated. In this paper, the main standard calculation procedures addressed to chillers and specified in EN 16798-13:2017 were analysed, with a focus on the required input data and the calculation procedures. The same approach was then applied to the more detailed calculation methods used in the dynamic tools EnergyPlus and TRNSYS, and the results were compared. The theoretical analysis was then followed by a case study approach. A reference office building, representative of the Italian building stock, was selected and analysed in two different Italian climatic zones. The determination of the thermal energy need for cooling was performed by means of EnergyPlus, while the assessment of the energy demand related to technical building systems was performed both with EnergyPlus and with the standard procedures. This paper is part of a wider research activity finalised to the analysis of the technical building systems calculation procedures, taking into account different generation systems and thermal coupling modes between the technical systems and the building itself.