Enhancing strength and ductility in a near medium Mn austenitic steel via multiple deformation mechanisms through nanoprecipitation. (15th January 2023)

• Record Type: Journal Article
• Authors: Gao, Junheng; Jiang, Suihe; Zhao, Haitao; Huang, Yuhe; Zhang, Huairuo; Wang, Shuize; Wu, Guilin; Wu, Yuan; Wu, Honghui; Davydov, Albert; Rainforth, William Mark; Lu, Zhaoping; Mao, Xinping
• Is Part Of: Acta materialia. Volume 243(2023)
• Publication Date: 2023-01-15
• Subjects: Austenitic steel -- Deformation mechanism -- Twinning -- Grain refinement -- Stacking fault energy -- Nanoprecipitation; Materials -- Periodicals; Materials science -- Periodicals; Materials -- Mechanical properties -- Periodicals; Metallurgy -- Periodicals; Chemistry, Inorganic -- Periodicals; 620.112
• DOI: 10.1016/j.actamat.2022.118538
• Languages: English
• ISSNs: 1359-6454

Abstract

Abstract: High-Mn austenitic steels, usually deformed via the TWIP (twinning induced plasticity) mechanism, suffer high cost and other technical issues (e.g., hot-dip galvanizing, welding, etc.) from the high Mn content. Nevertheless, decreasing the Mn content would result in a shift of deformation mechanisms from TWIP to TRIP (transformation induced plasticity), usually causing quasi-cleavage brittle fracture. Herein, we report that by massive nanoprecipitation of coherent disordered particles, the grain sizes of a near medium Mn austenitic steel are successfully refined to 0.9 ± 0.4 μ m, leading to a significant stacking fault energy increment of 6.4–7.9 mJ m –2 and accordingly, the transition of deformation mechanism from TRIP to multiple deformation mechanisms, namely, stacking faults, dislocation slip, nanotwinning and ԑ-martensite transformation. Moreover, the high-density of coherent nanoprecipitates effectively refines ԑ martensite and nanotwins from 20–500 nm and 10–50 nm to a few atomic columns and 1–15 nm, respectively. More importantly, these deformation mechanisms were sequentially activated at different deformation stages, resulting in a consistently high work hardening rate. Based on the synergistic refinement effects of grains, twins and martensite and the transition of deformation mechanism, a near medium Mn ultrafine-grained (UFG) austenitic steel with 15 wt.% Mn is developed, which shows a unique combination of high tensile strength (1210 ± 19 MPa) and large elongation (72 ± 6 %). These findings provide a new route to addressing the trade-off between the Mn content and mechanical performance of high-Mn austenitic steels which could facilitate their widespread applications. Graphical Abstract: Image, graphical abstract