Near-infrared transmissive properties of porous Si/Al2O3 photonic crystal band gaps. (December 2022) - A. Min-Dianey, Kossi A.
Abstract: The light transmission properties through one-dimensional (1D) photonic crystal (PhC) with known material porosity rather than refractive index (RI) was investigated at normal incidence. The 1D PhC consists of a periodic structure of porous silicon/porous alumina (PSi/PAl2 O3 ) layers with different dielectric constants arranged in the same dimension. The transmission spectral was computed using the transfer matrix method (TMM) for isotropic materials. This was used to investigate the effect of porosity on the transmission bands through such structures in the near-infrared wavelength range of 800–2200 nm. The results revealed that increasing porosity, which corresponds to a decrease in effective refraction index (ERI), narrows the transmission passband (PB). While the appearance of the stopband (SB) becomes more visible as porosity increases. Furthermore, the increase in unit cells resulted in the apparent formation of a transmission SB. Therefore, the transmission characteristics through porous materials-based PhC can be improved by controlling the porosity of the materials used as layers in such a design. These new insights on the porous materials-based PhC might inspire potential application such as selective filter in thermophotovoltaic systems. Graphical Abstract: ga1 Highlights: Effect of porosity on transmission through porous Si/Al2 O3 1D PhC was studied. The width of the pass band decreased with increase in porosity. The appearance of the stop band was visibly apparent as porosity increased. Increase in unit cells ensued apparent creation of transmission stop band. Transmission characteristics in PhC can be enhanced by controlling the porosity.