Conversion of low density polyethylene foams into auxetic metamaterials. (20th September 2022) - Chen, Xiao Yuan
Abstract: Cellular polymers, such as polyethylene foams, are commonly used in the packaging industry. These materials have short service life and generate a high volume of waste after use. In order to valorize this waste and produce added‐value applications, it is proposed to convert these materials into highly efficient energy absorption structures. This was done by modifying the original cellular morphology of the foams (spheroidal or polygonal) into a re‐entrant structure to produce auxetic materials. This work presents an optimized process combining mechanical compression and solvent vapor evaporation‐condensation leading to low density foams (77–200 kg/m 3 ) having negative Poisson's ratios (NPR). Three series of recycled low density polyethylene (LDPE) foams with an initial density of 16, 21, and 36 kg/m 3 were used to optimize the processing conditions in terms of treatment temperature, time, and pressure. From all the samples prepared, a minimum Poisson's ratio of −3.5 was obtained. To further characterize the samples, the final foam structure was analyzed to relate with mechanical properties and compare with conventional foams having positive Poisson's ratios. The results are discussed using tensile properties and energy dissipation which were shown to be highly improved for auxetic foams. Overall, the resulting foams can be used in several applications such as sport and military protection equipment.