Electrodeposition of Pd–Ag alloy for electrical contacts. (3rd June 2022)

• Record Type: Journal Article
• Authors: Nguyen, Yen Ngoc; Yoon, Jisun; Shin, Jiyeon; Son, Injoon
• Is Part Of: Surface engineering. Volume 38:Number 6(2022)
• Page Start: 633
• Page End: 640
• Publication Date: 2022-06-03
• Subjects: palladium -- silver -- alloy -- electrodeposition -- contact -- resistance -- aging; Surfaces (Technology) -- Periodicals; Coatings -- Periodicals; 620.4405
• DOI: 10.1080/02670844.2022.2151335
• Languages: English
• ISSNs: 0267-0844

Abstract

ABSTRACT: Pd–Ag alloy electrodeposit was proposed as a protective coating for electrical contacts. Before Pd alloy deposition, Ni was electroplated on a Cu substrate to limit Cu diffusion into the Pd coating. Pd–Ag alloy coatings with different Ag content were obtained using electrodeposition. Ag atomic per cent in the coatings was changed by varying the Ag mass concentration in the bath solution. Subsequently, the coated substrate experienced heat treatment at 260°C for 600 s. The contact resistance of the Pd-based coatings decreased along with the increase in the Ag content, but that of heated coatings increased. Furthermore, the wettability of the Pd-based coatings with solder was enhanced owing to the increase in Ag quantity. The qualitative analysis indicated that Pd–Ag coatings inhibited Ni diffusion to the surface, which would be oxidized during heat treatment, diminishing contact resistance and wettability.