Membrane cleaning in membrane distillation of reverse osmosis concentrate generated in landfill leachate treatment. (9th December 2021)

• Record Type: Journal Article
• Authors: Jia, Xiaolin; Li, Kuiling; Wang, Baoqiang; Zhao, ZhiChao; Hou, Deyin; Wang, Jun
• Is Part Of: Water science and technology. Volume 85:Number 1(2022)
• Page Start: 244
• Page End: 256
• Publication Date: 2021-12-09
• Subjects: concentrated brine -- landfill leachate -- membrane cleaning -- membrane distillation -- membrane fouling; Water -- Pollution; Sewage -- Purification; Water quality management; Periodicals; 628.168
• DOI: 10.2166/wst.2021.614
• Languages: English
• ISSNs: 0273-1223

Abstract

Abstract: As a thermally induced membrane separation process, membrane distillation (MD) has drawn more and more attention to the advantages of treating hypersaline wastewaters, especially the concentrate from the reverse osmosis (RO) process. One of the major obstacles in widespread MD application is the membrane fouling. We investigated the feasibility of direct contact membrane distillation (DCMD) for landfill leachate reverse osmosis concentrate (LFLRO) brine treatment and systematically assessed the efficiency of chemical cleaning for DCMD after processing LFLRO brine. The results showed that 80% water recovery rate was achieved when processing the LFLRO brine by DCMD, but membrane fouling occurred during the DCMD process, and manifested as the decreasing of permeate flux and the increasing of permeate conductivity. Analysis revealed that the serious flux reduction was primarily caused by the fouling layer, which consisted of organic matter and inorganic salts. Five cleaning methods were investigated for membrane cleaning, including hydrogen chloride (HCl)-sodium hydroxide (NaOH), ethylene diamine tetraacetic acid (EDTA)-NaOH, citric acid, sodium hypochlorite (NaClO) and sodium dodecyl sulphate (SDS) cleaning. Among the chemical cleaning methods investigated, the 3 wt.% SDS cleaning showed the best efficiency at recovering the performance of fouled membranes. HIGHLIGHTS: The performance of LFLRO treatment using MD process was evaluated. The membrane fouling was primarily caused by a mixture of salts and organic matters. Removal of pollutants inside membrane pores was key to avoiding membrane wetting. The SDS solution cleaning was most effective in recovering membrane performance. Graphical Abstract