High-temperature fatigue crack growth characteristics of IN718 Ni-based alloy treated by laser peening. (December 2022)

• Record Type: Journal Article
• Authors: Huang, Shu; Liu, Jianjun; Sheng, Jie; Meng, Xiankai; Hu, Xiaoqi; Zhu, Mingliang; Lu, Jinzhong; Zhou, Jianzhong
• Is Part Of: Engineering fracture mechanics. Volume 276:Part B(2022)
• Publication Date: 2022-12
• Subjects: Laser peening -- IN718 Ni-based alloy -- Residual stress relaxation -- High-temperature fatigue crack growth -- Fatigue life; Fracture mechanics -- Periodicals; Rupture, Mécanique de la -- Périodiques; Fracture mechanics; Periodicals; 620.112605
• DOI: 10.1016/j.engfracmech.2022.108922
• Languages: English
• ISSNs: 0013-7944

Abstract

Highlights: High-temperature fatigue crack growth (FCG) characteristics of IN718 Ni-based alloy after laser peening (LP) were investigated. The residual stress relaxation and micro-structure evolution of the samples at high temperature after LP were analyzed. The CRS can reduce the ΔK of the crack tip, which is an important reason for decreasing FCG rate of IN718 Ni-based alloy. The strengthening mechanism of LP on the high-temperature FCG resistance of IN718 Ni-based alloy was discussed. Abstract: The characteristics of fatigue crack growth (FCG) of laser peened IN718 Ni-based alloy at high temperature with different laser power densities were studied. The residual stress relaxation and micro-structure evolution of the samples at high temperature after laser peening (LP) were analyzed by X-ray diffraction technique and scanning electron microscopy (SEM), respectively. Meanwhile, SEM was used to characterize the fracture morphologies of the samples. The strengthening mechanism of LP on the high-temperature FCG resistance of IN718 Ni-based alloy was discussed. The results showed that large compressive residual stress, fine grains and complex grain boundaries induced by LP could significantly enhance the resistance of FCG at 700 °C. As a result, the FCG rate was decreased and fatigue life of the sample was increased. In addition, the laser power density was found to be inversely proportional to the average spacing of fatigue striations and directly proportional to the size and depth of dimples, which indicated that the increase in laser power density can improve the high-temperature FCG resistance of IN718 Ni-based alloy.