Optimization and Modeling of Sound-Absorption Properties of Natural Fibers for Acoustical Application. Issue 13 (1st December 2022)

• Record Type: Journal Article
• Authors: Samaei, Seyed Ehsan; Taban, Ebrahim; Berardi, Umberto; Mousavi, Seyyed Mohammad; Faridan, Mohammad; Hassan, AsilianMahabadi
• Is Part Of: Journal of natural fibers. Volume 19:Issue 13(2022)
• Page Start: 7157
• Page End: 7173
• Publication Date: 2022-12-01
• Subjects: Kenaf fiber -- chemical treatment -- morphology -- acoustic absorption -- numerical model -- inverse method; 红麻纤维 -- 化学处理 -- 形态 -- 吸声 -- 数值模型 -- 反演方法; Textile research -- Periodicals; Textile research; Periodicals; 677.005
• DOI: 10.1080/15440478.2021.1944429
• Languages: English
• ISSNs: 1544-0478

Abstract

ABSTRACT: Kenaf fibers have long been utilized because of their remarkable properties, such as availability, durability, and strength. Recently, they have also been used as sound-absorbing composites for noise control purposes. This paper investigates the possibility of improving the tensile strength of kenaf fibers through optimizing the alkaline treatment process. It also considers the effects of such optimization on the acoustic absorption coefficients of the samples fabricated from these treated kenaf fibers as well as the applicability of the numerical model to predict the acoustic absorption. Having employed the response surface methodology (RSM) to optimize the alkaline treatment process and achieve optimal conditions for the kenaf fibers, the scanning electron microscopy (SEM) and tensile test were used to study and compare the morphological and tensile properties of raw fibers (nonoptimal) and the fibers treated in optimal conditions. Several cylindrical samples with constant thickness and density (30 mm and 200 kg/m 3 ) were then made of fibers treated in optimal conditions. The sound absorption coefficient, porosity, and airflow resistivity of these samples were measured based using ISO 10534–2 (impedance tube system), SEM and ASTM C423-09A, respectively. The results demonstrated that the tensile strength of optimally treated fibers increased by 182.39%. The acoustic absorption coefficients of the samples fabricated from these fibers were also higher at all frequencies (low-, mid-, and high-frequency range) compared with samples made of untreated fibers in a way that the Sound Absorption Average value of the former increased by 17.97%. Moreover, it was found that inverted Dunn and Davern model via Nelder-Mead simplex method well follows the sound absorption pattern from the experimental results in the overall frequency range. The use of multifaceted improvement approaches for natural materials such as kenaf fibers increases the usability of these materials as sustainable and eco-friendly alternatives in the engineering process of manufacturing sound-absorbing materials.