Bench Performance of Ventilators during Simulated Paediatric Ventilation. Issue 3 (May 2013)

• Record Type: Journal Article
• Authors: Park, M. A. J.; Freebairn, R. C.; Gomersall, C. D.
• Is Part Of: Anaesthesia and intensive care. Volume 41:Issue 3(2013)
• Page Start: 349
• Page End: 358
• Publication Date: 2013-05
• Subjects: ventilators: bench testing -- ventilation: paediatric simulation -- ARDS: paediatric; Anesthesiology -- Periodicals; Intensive Care Units -- Periodicals; 617.96
• DOI: 10.1177/0310057X1304100312
• Languages: English
• ISSNs: 0310-057X

Abstract

This study compares the accuracy and capabilities of various ventilators using a paediatric acute respiratory distress syndrome lung model. Various compliance settings and respiratory rate settings were used. The study was done in three parts: tidal volume and FiO2 accuracy; pressure control accuracy and positive end-expiratory pressure (PEEP) accuracy. The parameters set on the ventilator were compared with either or both of the measured parameters by the test lung and the ventilator. The results revealed that none of the ventilators could consistently deliver tidal volumes within 1 ml/kg of the set tidal volume, and the discrepancy between the delivered volume and the volume measured by the ventilator varied greatly. The target tidal volume was 8 ml/kg, but delivered tidal volumes ranged from 3.6–11.4 ml/kg and the volumes measured by the ventilator ranged from 4.1–20.6 ml/kg. All the ventilators maintained pressure within 20% of the set pressure, except one ventilator which delivered pressures of up to 27% higher than the set pressure. Two ventilators maintained PEEP within 10% of the prescribed PEEP. The majority of the readings were also within 10%. However, three ventilators delivered, at times, PEEPs over 20% higher. In conclusion, as lung compliance decreases, especially in paediatric patients, some ventilators perform better than others. This study highlights situations where ventilators may not be able to deliver, nor adequately measure, set tidal volumes, pressure, PEEP or FiO2 .