Catalytic hydrothermal liquefaction of biomass with K2CO3 for production of gasification feedstock. Issue 2 (7th February 2021)

• Record Type: Journal Article
• Authors: Hardi, Flabianus; Furusjö, Erik; Kirtania, Kawnish; Imai, Akihisa; Umeki, Kentaro; Yoshikawa, Kunio
• Is Part Of: Biofuels. Volume 12:Issue 2(2021)
• Page Start: 149
• Page End: 160
• Publication Date: 2021-02-07
• Subjects: Hydrothermal liquefaction -- pine sawdust -- K2CO3 -- response surface methodology; Biomass energy -- Periodicals; 662.8805
• DOI: 10.1080/17597269.2018.1461521
• Languages: English
• ISSNs: 1759-7269

Abstract

ABSTRACT: The introduction of alkali catalyst during hydrothermal liquefaction (HTL) improves conversion and allows the aqueous liquid product to be used as gasification feedstock. This study investigates the effect of reaction temperature (240–300°C), sawdust mass fraction (9.1–25%) and reaction time (0–60 min) during K2 CO3 -catalytic HTL of pine sawdust. The highest biomass conversion (75.2% carbon conversion and 83.0% mass conversion) was achieved at a reaction temperature of 270°C, 9.1% sawdust mass fraction and 30 min reaction time; meanwhile, the maximum aqueous product (AP) yield (69.0% carbon yield and 73.5% mass yield) was found at a reaction temperature of 300°C, 9.1% sawdust mass fraction and 60 min reaction time. Based on the main experimental results, models for carbon and mass yields of the products were developed according to face-centered central composite design using response surface methodology. Biomass conversion and product yields had a positive correlation with reaction temperature and reaction time, while they had an inverse correlation with sawdust mass fraction. Further investigation of the effects of biomass/water and biomass/K2 CO3 ratios revealed that both high water loading and high K2 CO3 loading enhanced conversion and AP yield.