Angular Dependence of the MOSFET Dosimeter and its Impact on In vivo Surface Dose Measurement in Breast Cancer Treatment. (August 2014)

• Record Type: Journal Article
• Authors: Qin, Songbing; Chen, Ting; Wang, Lili; Tu, Yu; Yue, Ning; Zhou, Juying
• Is Part Of: Technology in cancer research & treatment. Volume 13:Number 4(2014)
• Page Start: 345
• Page End: 352
• Publication Date: 2014-08
• Subjects: MOSFET -- In vivo dosimetry -- Breast cancer -- Radiochromic film; Oncology -- Periodicals; Cancer -- Diagnosis -- Periodicals; Cancer -- Treatment -- Technological innovations -- Periodicals; 616.994
• DOI: 10.7785/tcrt.2012.500382
• Languages: English
• ISSNs: 1533-0346

Abstract

The focus of this study is the angular dependence of two types of Metal Oxide Semiconductor Field Effect Transistor (MOSFET) dosimeters (MOSFET20 and OneDose/OneDosePlus) when used for surface dose measurements. External beam radiationat different gantry angles were delivered to a cubic solid water phantom with a MOSFET placed on the top surface at CAX. The long axis of the MOSFET was oriented along the gantry axis of rotation, with the dosimeter (bubble side) facing the radiation source. MOSFET-measured surface doses were compared against calibrated radiochromic film readings. It was found that both types of MOSFET dosimeters exhibited larger than previously reported angular dependence when measuring surface dose in beams at large oblique angles. For the MOSFET20 dosimeter the measured surface dose deviation against film readings was as high as 17% when the incident angle was 72 degrees to the norm of the phantom surface. It is concluded that some MOSFET dosimeters may have a strong angular dependence when placed on the surface of water-equivalent material, even though they may have an isotropic angular response when surrounded by uniform medium. Extra on-surface calibration maybe necessary before using MOSFET dosimeters for skin dose measurement in tangential fields.