A prediction and compensation method of robot tracking error considering pose-dependent load decomposition. (April 2023)

• Record Type: Journal Article
• Authors: Tan, Shizhong; Yang, Jixiang; Ding, Han
• Is Part Of: Robotics and computer-integrated manufacturing. Volume 80(2023)
• Publication Date: 2023-04
• Subjects: Error prediction -- Error compensation -- Pose-dependent -- Robot; Robots, Industrial -- Periodicals; Computer integrated manufacturing systems -- Periodicals; Robotics -- Periodicals; Robots industriels -- Périodiques; Productique -- Périodiques; Robotique -- Périodiques; 670.285
• DOI: 10.1016/j.rcim.2022.102476
• Languages: English
• ISSNs: 0736-5845

Abstract

Highlights: A prediction and compensation approach of robot tracking error is developed by using a TCN model. The disturbance of terminal load decomposed on each joint is considered as input feature of the error prediction model. A data enhancement method is developed by splitting and integrating the position, velocity and the effect of load. The predicted errors are utilized to pre-compensate commands to improve the tracking accuracy of joints. Abstract: Industrial robots are widely used because of their high flexibility and low cost compared with CNC machine tools, but the low tracking accuracy limits their application in the field of high-precision manufacturing. To improve the tracking accuracy and solve the complex modeling problems, a prediction and compensation method of robot tracking error is proposed based on temporal convolutional network (TCN), where the pose-dependent effect of load on joint tracking error is considered. The terminal load is decomposed to joint load by using Jacobian matrix and then used as the pose-dependent information of the data-based model. A prediction model based on TCN is used to predict the tracking error of joints. Finally, a pre-compensation method is adopted to improve the joint tracking accuracy based on the predicted errors. Experimental results show that the model presents good prediction and compensation accuracy. The mean absolute tracking errors are increased by more than 80% in the test path. This method can effectively compensate the tracking errors of the robot joints and therefore greatly improve the tracking accuracy of the tool center point and tool orientation in the Cartesian coordinate system.