Effects of fiber bundle nonuniformity on dehumidification performance and energy efficiency of pressure‐driven membrane modules. (30th May 2022)

• Record Type: Journal Article
• Authors: Liu, Yilin; Cui, Xin; Yan, Weichao; Su, Jincai; Meng, Xiangzhao; Jin, Liwen
• Is Part Of: International journal of energy research. Volume 46:Number 13(2022)
• Page Start: 19206
• Page End: 19220
• Publication Date: 2022-05-30
• Subjects: dehumidification rate -- fiber arrangement -- fiber bundles nonuniformity -- filling rate -- hollow fiber module; Power resources -- Periodicals; Power (Mechanics) -- Periodicals; Power resources -- Research -- Periodicals; 621.042
• DOI: 10.1002/er.8128
• Languages: English
• ISSNs: 0363-907X

Abstract

Summary: The physical permeation‐based membrane dehumidification technology has excellent energy‐saving capacity. The nonuniformity of fiber bundles affects largely the flow status in the shell side of pressure‐driven membrane modules, and therefore the dehumidification performance and energy efficiency of the membrane system. To explore the effects of fibre bundles nonuniformity, three‐dimensional membrane dehumidification models with different fiber arrangements and filling rates were developed. The friction coefficient, dehumidification rate and energy efficiency of the membrane system were discussed for the comprehensive evaluation of module performance. It is found that the dehumidification rate of regular configuration is slightly better than that of random configuration, but the advantage is gradually weakened with the increase in filling rate. The obtained inversely proportional fitting function of f = 58.81/ R e can be used to predict the flow resistance in the fiber lumen. Under the same air parameters, operating conditions and fiber size, the fiber distribution has a negligible effect on the dehumidification COP. The dehumidification rate rises significantly with the filling rate, up to 94.88% at a 47% filling rate accompanied by the maximum flow resistance. The dimensionless analysis indicates that the membrane module with a filling rate of 21.5% ~ 23% would achieve optimal performance in terms of system energy efficiency and overall dehumidification capacity. Highlights: Effects of fiber bundle nonuniformity on pressure‐driven membrane dehumidification were studied. 3D models with different fiber arrangements and filling rates were developed. The advantage of regular configuration is weakened with increasing filling rate. Fiber distribution has a negligible effect on COP under the same operating conditions. Membrane module with a filling rate of 21.5% ~ 23% achieves a balanced overall performance. Novelty Statement: Concentrating on the structure optimization and energy efficiency improvement of the pressure‐driven membrane module, the effects of fiber bundle nonuniformity on the air dehumidification process were investigated. Differences in flow status and dehumidification performance between regular and random fiber configurations were discussed. The study quantitatively revealed the relationship between energy efficiency and dehumidification performance with different filling rates, which has not been reported in the literature. The findings may provide theoretical guidance for the structural design of dehumidification membrane modules driven by pressure differences. Abstract : Dehumidification performance and energy efficiency of pressure‐driven membrane modules under different fiber distributions were studied. The advantages of regular configuration weaken gradually with the increase in filling rate. A proper filling rate of 21.5%–23% was achieved by quantitative analysis in terms of dehumidification performance and energy efficiency.