A machine learning approach for clinker quality prediction and nonlinear model predictive control design for a rotary cement kiln. Issue 4 (3rd August 2022)

• Record Type: Journal Article
• Authors: Ali, Asem M.; Tabares, Juan David; McGinley, Mark W.
• Other Names: Malkani Haresh guestEditor.; Korambath Prakashan guestEditor.
• Is Part Of: Journal of advanced manufacturing and processing. Volume 4:Issue 4(2022)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2022-08-03
• Subjects: cement Smart manufacturing -- clinker quality -- data analysis -- energy optimization -- neural networks -- nonlinear model predictive control (NMPC); Chemical engineering -- Periodicals; Manufacturing processes -- Technological innovations -- Periodicals; Manufacturing processes; Electronic journals; Periodicals; 660
• DOI: 10.1002/amp2.10137
• Languages: English
• ISSNs: 2637-403X

Abstract

Abstract: Cement manufacturing is energy‐intensive (5Gj/t) and comprises a significant portion of the energy footprint of concrete systems. Incorporating modern monitoring, simulation and control systems will allow lower energy use, lower environmental impact, and lower costs of this widely used construction material. One of the goals of the CESMII roadmap project on the Smart Manufacturing of Cement included developing an analytical process model for clinker quality that includes the chemistry of the kiln feed and accounts for critical process variables. This predictive model will be used in nonlinear model predictive control system designed to significantly reduce process energy use while maintaining or improving product quality. In the cement manufacturing plant used in this study, the kiln feed (meal) is tested every 12 h and used to estimate the mineral composition of the cement kiln output (clinker) using the stoichiometry‐based Bogue's model and the expertise of the plant operators. During kiln operation, kiln output (clinker) is sampled and tested every 2 h to measure its chemical and mineral composition. The predicted and measured values of the clinker composition are used by the plant operators to adjust the kiln input stream and the production process characteristics to maintain stable operation and uniform product quality. However, the time delay between prediction and testing, along with inaccuracies inherent in the Bogue's model have made any process changes designed to minimize energy use problematic, especially in‐light of potential clinker quality issues that process changes often pose. A new analytical model that integrates quality information and process operation information has been developed from data collected from 2 years of production from an operating cement facility. To make the model fuel‐type‐independent, consumed heat energy was computed in the model instead of fuel type and amount. A Feedforward Network was trained and tailored from collected data. Many data‐based simulations were conducted to quantitatively evaluate the proposed model and the 5‐fold cross‐validation procedure was used to test the models. The resulting predictive model was shown to have a low root mean square error (MSE) with respect to the estimated clinker mineral composition compared to that using the industry standard "Bogue' model". The end goal of this work was to develop a single machine learning tool that allows the use of quality control data and process control variables to improve energy efficiency of the process in a continuous fashion. The proposed nonlinear model predictive control system (NMPC) can generate predicted kiln production characteristics based on manipulated variables in manner that accurately follows the target product quality values. Simulation results also show that the proposed model produced accurate predictions of kiln outputs that fell within the required constraints, while manipulating control variables within typical operational ranges. Abstract : The end goal of this work is to develop a single machine learning tool that allows the use of quality control data and process control parameters to improve energy efficiency of the process in a continuous fashion. A new analytical model that integrates quality information and process operation information has been developed from collected data. A Feedforward Network was trained and tailored from collected data. The proposed nonlinear model predictive controller system (NMPC) can generate predicted kiln production characteristics based on manipulated variables in manner that accurately follows the target product quality values. This proposed model produced accurate predictions of kiln outputs that fell within the required constraints, while manipulating control variables within typical operational ranges