Pre-production results from ATLAS ITk Strip Sensors Quality Assurance Testchip. (1st November 2022)

• Record Type: Journal Article
• Authors: Allport, P.; Bach, E.; Basso, M.J.; Chisholm, A.; Cindro, V.; Fadeyev, V.; Fernández-Tejero, J.; Fleta, C.; George, W.; Gonella, L.; Hara, K.; Hirose, S.; Ishii, T.; Klein, C.; Knight, T.; Koffas, T.; Kopsalis, I.; Kroll, J.; Kuramochi, K.; Kvasnicka, J.; Latonova, V.; Mandic, I.; Mikestikova, M.; Orr, R.S.; Rossi, E.; Saito, K.; Sánchez, S.; Soldevila, U.; Staats, E.; Ullán, M.; Unno, Y.;
• Is Part Of: Journal of instrumentation. Volume 17:Number 11(2022)
• Publication Date: 2022-11-01
• Subjects: Particle tracking detectors (Solid-state detectors) -- Si microstrip and pad detectors; Scientific apparatus and instruments -- Periodicals; 502.84
• DOI: 10.1088/1748-0221/17/11/C11002
• Languages: English
• ISSNs: 1748-0221

Abstract

Abstract: The production of strip sensors within the framework of the ATLAS Inner Tracker (ITk) development is a process which requires continuous evaluation during the full production period (about 4 years). Such an evaluation is divided into two different parts: Quality Control (QC), which focuses on the final product (the actual sensors) and tries to identify possible defects once the fabrication is completed, and Quality Assurance (QA), which aims to prevent deviations in the manufacturing process and uses specifically-designed test structures. The initial sensor pre-production consists of 5% (1041 sensors) of the total number of sensors expected during production. As part of pre-production, the collaboration has measured key parameters from miniature strip sensors (minis), monitor diodes (MD8), and the ATLAS Testchip, before and after irradiation. In this contribution we focus on the analysis of the results of the MD8 and the Testchip. All parameters have been obtained from the test structures (MD8, bias resistors, interdigitated structures, field oxide capacitors, coupling capacitors, punch-through protection structures and cross-bridge resistors) measured at the different test sites (KEK/Tsukuba, Birmingham, Toronto, Ljubljana, Valencia, Carleton, Prague, CNM-Barcelona). The results are compared to predefined pre- and post-irradiation specifications for each tested parameter.