Feasibility study of flopper stoppers as a passive roll compensation system for offshore construction vessels. (15th November 2022)

• Record Type: Journal Article
• Authors: Ribadeneira, Benito; Benalcázar, Sebastian; Guachamin-Acero, Wilson
• Is Part Of: Ocean engineering. Volume 264(2022)
• Publication Date: 2022-11-15
• Subjects: Roll compensation -- Offshore construction vessel -- Passive system -- Flopper stopper -- Operability; Ocean engineering -- Periodicals; Ocean engineering; Periodicals; 620.4162
• DOI: 10.1016/j.oceaneng.2022.112380
• Languages: English
• ISSNs: 0029-8018

Abstract

Abstract: Heavy lift vessels are used to install offshore infrastructure. For floating vessels, roll responses can significantly limit their operability, especially for offshore sites where multimodal wave spectra are expected. This paper deals with a numerical study of a heavy lift vessel equipped with submerged flopper stopper (FS) templates suspended from the sides of the vessel. Dynamic analyses for various sizes and numbers of FS templates were conducted. A medium-size (28 m × 14 m) template can increase operational limits by shifting the roll's natural frequency towards lower values and dampening the responses through drag forces. The operability can increase by about 500% when compared with a vessel without FS templates. A preliminary structural design of a critical beam shows an ultimate limit state design safety factor of 1.5 and fatigue damage of 0.32 for 20 years of service. The cost of construction per template is about $1.75 million (U.S. dollars); the total cost of 4 templates could be recovered in a single wind farm installation project. The system is shown to be feasible for construction vessels used in the execution of marine operations, especially heavy lifting. Highlights: A passive roll compensation system using flopper stoppers for offshore construction vessels. The proposed concept is shown to be technically and economically feasible. The proposed concept is suitable for crane vessels that operate in combined wind sea and swells. Four medium size flopper stoppers can increase the operability of a vessel in 500%. Construction costs can be recovered in a single large offshore wind farm project.