Comprehensive numerical investigations on the thermal performance of heat recirculating micro combustor with pin fins for micro-thermal voltaic system applications. (1st November 2022)

• Record Type: Journal Article
• Authors: You, Jingxiang; Yan, Yunfei; He, Ziqiang; Xue, Zongguo; Zhang, Chenghua; Chen, Yanrong
• Is Part Of: International journal of hydrogen energy. Volume 47:Number 89(2022)
• Page Start: 38043
• Page End: 38054
• Publication Date: 2022-11-01
• Subjects: Numerical simulation -- Micro combustors -- Energy output -- Heat recirculation -- Pin fins; Hydrogen as fuel -- Periodicals; Hydrogène (Combustible) -- Périodiques; Hydrogen as fuel; Periodicals; 665.81
• DOI: 10.1016/j.ijhydene.2022.08.294
• Languages: English
• ISSNs: 0360-3199

Abstract

Abstract: Aiming at improving the relatively low energy output and energy conversion efficiency of the micro-thermal voltaic (MTPV) system, an innovative heat recirculating micro combustor with pin fins is designed. The effects of pin fins arrangement, hydrogen/air equivalent ratio on the energy output and performance of CHMC, HMCP and HMCI are compared and investigated. The result shows that when the Vin is 6 m/s and Φ is 1.0, the emitter power of CHMC is 72.76W, and that of HCMP and HCMI micro combustor are 75.99W and 76.35W. and the emitter efficiency of CHMC, HCMP and HCMI is 41.93%, 43.26% and 44.01%. HMCI has better energy output capability compared with CHMC and HMCP. Even though, HMCI brings a higher pressure drop, it is within the acceptable range. When the Vin is 6 m/s, the pressure drop from the pin fins only accounts for 26.4% of the total pressure drop for HMCI. Through the study of equivalent ratio, it is found that HMCI has good adaptability in different equivalent ratio range. This work provides new ideas for the development of MTPV system in the future. Highlights: Heat recirculation micro combustor with pin fins is proposed to improve energy output. The output power of the innovative micro combustors is increased. Heat recirculating micro combustor with interlaced pin fins has the highest emitter power.