Optimization of MLP neural network for modeling flow boiling performance of Al2O3/water nanofluids in a horizontal tube. (December 2022) - Ghazvini, Mahyar
Abstract: In this paper, a multilayer perceptron (MLP) artificial neural network (ANN) with a back-propagation (BP) training algorithm is applied for modeling thermophysical properties and subcooled flow boiling performance of Al2 O3 /water nanofluid in a horizontal tube. The influence of nanofluid concentration, heat flux, and flow rate on different thermophysical parameters, including thermal conductivity, thermal conductivity enhancement, viscosity, viscosity enhancement, and heat transfer coefficient, are investigated. Specifically, flow boiling of Al2 O3 /water nanofluid in a horizontal tube is modeled with the MLP neural network optimized by three novel swarm-based optimization algorithms: namely, Equilibrium Optimizer (EO), Marine Predators Algorithm (MPA), and Slime Mould Algorithm (SMA). To evaluate the effectiveness of different models, the MSE (Mean-Square Error) of the ANN model with varying optimization algorithms is calculated and compared. Additionally, the optimal network and regression values for each parameter are determined. The results show that the applied neural network and optimization algorithms could model the thermal conductivity, thermal conductivity enhancement, and viscosity better than the viscosity enhancement and heat transfer coefficient. The MSE of the best network for the thermal conductivity is 2.693 × 10 −7, while the MSE of the best network for the viscosity enhancement is 0.0598. Also, the EO algorithm achieves the best optimization for the first three outputs, thermal conductivity, thermal conductivity enhancement, and viscosity. In comparison, the MPA algorithm extracts the optimal network for the other two outputs, viscosity enhancement, and heat transfer coefficient.