A newly treated boundary conditions to enhance accuracy of finite element analysis for orifice-type aerostatic bearings. (November 2022)

• Record Type: Journal Article
• Authors: Wu, Yangong; Qiao, Zheng; Xue, Jiadai; Wang, Bo; Chen, Wentao
• Is Part Of: Advances in engineering software. Volume 173(2022)
• Publication Date: 2022-11
• Subjects: Aerostatic bearings -- Reynolds equation -- Treated boundary condition -- Numerical calculation method -- Mesh-independent model -- Error analysis; Computer-aided engineering -- Periodicals; Engineering -- Computer programs -- Periodicals; Engineering -- Software -- Periodicals; Periodicals; 620.0028553
• DOI: 10.1016/j.advengsoft.2022.103277
• Languages: English
• ISSNs: 0965-9978

Abstract

Highlights: The calculation procedures for predicting the performance of orifice-type aerostatic bearings are summarized and we found inappropriate boundary settings can cause significant numerical errors if the grid-dependent condition is ignored. This peculiar phenomenon is interpreted both mathematically and physically. A one-dimension finite difference model is calculated manually and auxiliary sources have proved to be an effective technique to reduce single-source numerical error to an acceptable level. The rule to model grid-independent FEM model is proposed and three modeling methods are given based on this rule. Experimental results are less than 5% deviation from theoretical values obtained from these numerical models. Abstract: Although numerical approaches have been extensively employed for solving the Reynolds equation in order to predict the performance of air bearings, we found inappropriate boundary settings can cause significant numerical errors if the grid-dependent condition is ignored. The current scrutiny is focused on crucial procedures for adopting the finite element method to assess the performance of orifice-type aerostatic bearings. To this end, numerical models for a single orifice-type are established and then checked by varying mesh sizes, mesh types, and boundary conditions (BCs). The obtained results reveal that those numerical models with a single-source node are grid-dependent, and the relative error is so large that the results are not credible compared with the analytical solution and becomes worse with denser meshes. This peculiar phenomenon can be mathematically interpreted by a one-dimension finite difference model calculated manually and auxiliary sources have proved to be an effective technique to reduce single-source numerical error to an acceptable level. Additionally, a physical explanation is given based on engineering systems modeling. By this view, rules of setting high pressure on the edge of recess are proposed and three types of grid-independent BC settings are proposed. Stiffness test experiments based on manufacturing a rotary table adopting multi-orifice aerostatic thrust bearings are further carried out to validate these numerical models, and the discrepancy between measured and calculated stiffness is reported to be lower than 5%.