Numerical investigation of n-dodecane ECN spray and combustion characteristics using the one-way coupled Eulerian-Lagrangian approach. (1st January 2023)

• Record Type: Journal Article
• Authors: Al-lehaibi, Moaz; Liu, Xinlei; Im, Hong G.
• Is Part Of: Fuel. Volume 331:Part 1(2023)
• Publication Date: 2023-01-01
• Subjects: n-Dodecane spray -- Coupled eulerian-lagrangian -- Engine combustion network -- Volume of fluid -- Jet flame structure -- Spray A; Fuel -- Periodicals; Coal -- Periodicals; Coal; Fuel; Periodicals; 662.6
• DOI: 10.1016/j.fuel.2022.125759
• Languages: English
• ISSNs: 0016-2361

Abstract

Highlights: Coupled Eulerian-Lagrangian spray simulations were performed. X-ray measured internal nozzle geometries were used for Eulerian simulations. The spray-combustion features of ECN Spray A, C, and D were analyzed. Cavitation and air entrainment phenomenon were generated in Spray C. The jet flame structures were identified to be composed of four primary regions. Abstract: This work investigated the spray and combustion characteristics of the Engine Combustion Network (ECN) n -dodecane injections using a one-way coupled Eulerian-Lagrangian approach. The actual X-ray measured injector geometries from the Argonne National Laboratory were adopted for Eulerian simulations. The multi-phase flow was modeled using the Volume-of-Fluid (VoF) method with the high-resolution interface capturing scheme to track the fluid-gas interface. The generated parcel data from the Eulerian simulations were mapped and utilized in the Lagrangian simulations to ensure fidelity. The simulation results agree well with the experimental data in terms of the projected density, mass flow rates, spray penetrations, mixture distributions, and ignition delays. The diverging nozzle channel in the Spray C injector resulted in cavitation and air entrainment, which reduced the mass flow rate. Because of the low oxygen concentration, the low-temperature combustion (LTC) reactions made a significant contribution to the heat release process. In comparison, similar jet-flame structures were observed for the Spray A, C, and D cases, consisting of the upstream LTC region, midstream intermediate-temperature combustion region, downstream fuel-rich high-temperature combustion (HTC) region, and downstream premixed HTC region. The higher ambient temperature led to a more advanced combustion phasing but shorter lift-off length. As a result, the mixing time was reduced to result in a higher concentration of acetylene. In addition, upon increasing the injection pressure, no significant difference was observed in the jet flame structure. On the other hand, the higher injection velocity resulted in a higher flame tip and broader HTC region.