Enhancing bioflocculation in high-rate activated sludge improves effluent quality yet increases sensitivity to surface overflow rate. (December 2022)

• Record Type: Journal Article
• Authors: Van Winckel, Tim; Ngo, Nam; Sturm, Belinda; Al-Omari, Ahmed; Wett, Bernhard; Bott, Charles; Vlaeminck, Siegfried E.; De Clippeleir, Haydée
• Is Part Of: Chemosphere. Volume 308:Part 2(2022)
• Publication Date: 2022-12
• Subjects: A-stage -- Floc formation -- Sewage -- Settling -- Wastewater; Pollution -- Periodicals; Pollution -- Physiological effect -- Periodicals; Environmental sciences -- Periodicals; Atmospheric chemistry -- Periodicals; 551.511
• DOI: 10.1016/j.chemosphere.2022.136294
• Languages: English
• ISSNs: 0045-6535

Abstract

Abstract: High-rate activated sludge (HRAS) relies on good bioflocculation and subsequent solid-liquid separation to maximize the capture of organics. However, full-scale applications often suffer from poor and unpredictable effluent suspended solids (ESS). While the biological aspects of bioflocculation are thoroughly investigated, the effects of fines (settling velocity < 0.6 m 3 /m 2 /h), shear and surface overflow rate (SOR) are unclear. This work tackled the impact of fines, shear, and SOR on the ESS in absence of settleable influent solids. This was assessed on a full-scale HRAS step-feed (SF) and pilot-scale HRAS contact-stabilization (CS) configuration using batch settling tests, controlled clarifier experiments, and continuous operation of reactors. Fines contributed up to 25% of the ESS in the full-scale SF configuration. ESS decreased up to 30 mg TSS/L when bioflocculation was enhanced with the CS configuration. The feast-famine regime applied in CS promoted the production of high-quality extracellular polymeric substances (EPS). However, this resulted in a narrow and unfavorable settling velocity distribution, with 50% ± 5% of the sludge mass settling between 0.6 and 1.5 m 3 /m 2 /h, thus increasing sensitivity towards SOR changes. A low shear environment (20 s −1 ) before the clarifier for at least one min was enough to ensure the best possible settling velocity distribution, regardless of prior shear conditions. Overall, this paper provides a more complete view on the drivers of ESS in HRAS systems, creating the foundation for the design of effective HRAS clarifiers. Tangible recommendations are given on how to manage fines and establish the optimal settling velocity of the sludge. Graphical abstract: Image 1 Highlights: Feast-famine improved floc formation in high-rate activated sludge . Feast-famine led to an increased sensitivity to shear forces prior to the clarifier. A low-shear zone in clarifier promoting reflocculation reduced influence of shear. Entrapment of fines in flocs crucial for obtaining good effluent quality.