A new approach for alkali incorporation in Cu2ZnSnS4 solar cells. (1st October 2022)

• Record Type: Journal Article
• Authors: Valdés, M; Hernández, A; Sánchez, Y; Fonoll, R; Placidi, M; Izquierdo, V; Cabas-Vidani, A; Valentini, M; Mittiga, A; Pistor, P; Malerba, C; Saucedo, E
• Is Part Of: JPhys energy. Volume 4:Number 4(2022)
• Publication Date: 2022-10-01
• Subjects: kesterite -- CZTS -- alkali doping -- CBD -- PDA -- thin film photovoltaics; Power resources -- Research -- Periodicals; Power resources -- Periodicals; 333.79
• DOI: 10.1088/2515-7655/ac96a4
• Languages: English
• ISSNs: 2515-7655

Abstract

Abstract: The addition of alkali elements has become mandatory for boosting solar cell performance in chalcogenide thin films based on kesterites (Cu2 ZnSnS4, CZTS). A novel doping process is presented here, that consists in the incorporation of sodium or lithium during the deposition of the CdS buffer layer, followed by a post-deposition annealing (PDA). As the doping route leads to more efficient devices in comparison with the undoped reference sample, the influence of PDA temperature was also investigated. Compositional profiling techniques, time-of-flight secondary ion mass spectrometry (TOF-SIMS) and glow discharge optical mission spectroscopy (GDOES), revealed a dependence of the alkaline distribution in kesterites with the PDA temperature. Although the doping process is effective in that it increases the alkaline concentration compared to the undoped sample, the compositional profiles indicate that a significant proportion of Li and Na remains 'trapped' within the CdS layer. In the 200 °C–300 °C range the alkali profiles registered the higher concentration inside the kesterite. Despite this, an additional alkali accumulation close to the molybdenum/fluorine doped tin oxide substrate was found for all the samples, which is frequently related to alkali segregation at interfaces. The addition of both, lithium and sodium, improves the photovoltaic response compared to the undoped reference device. This is mainly explained by a substantial improvement in the open-circuit potential ( V oc ) of the cells, with best devices achieving efficiencies of 4.5% and 3% for lithium and sodium, respectively. Scanning-electron microscopy images depicted a 'bilayer structure' with larger grains at the top and small grains at the bottom in all samples. Moreover, the calculated bandgap energies of the CZTS films account for changes in the crystallographic order-disorder of the kesterites, more related to the PDA treatment rather than alkali incorporation. Even if further optimization of the absorber synthesis and doping process will be required, this investigation allowed the evaluation of a novel strategy for alkali incorporation in kesterite based solar cells.