Ultrahigh yield strength and large uniform elongation achieved in ultrafine-grained titanium containing nitrogen. (November 2022)

• Record Type: Journal Article
• Authors: Chong, Yan; Tsuru, Tomohito; Guo, Baoqi; Gholizadeh, Reza; Inoue, Koji; Tsuji, Nobuhiro
• Is Part Of: Acta materialia. Volume 240(2022)
• Publication Date: 2022-11
• Subjects: Titanium -- Nitrogen -- Interstitial hardening -- dislocation -- Grain boundary segregation; Materials -- Periodicals; Materials science -- Periodicals; Materials -- Mechanical properties -- Periodicals; Metallurgy -- Periodicals; Chemistry, Inorganic -- Periodicals; 620.112
• DOI: 10.1016/j.actamat.2022.118356
• Languages: English
• ISSNs: 1359-6454

Abstract

Abstract: In this study, we systematically investigated the influences of nitrogen content and grain size on the tensile properties and deformation behaviors of titanium at room temperature. By high-pressure torsion and annealing, we obtained ultrafine-grained (UFG) Ti-0.3 wt%N alloy with a fully recrystallized microstructure, which combined an unprecedented synergy of ultrahigh yield strength (1.04 GPa) and large uniform elongation (10%). The hardening and strain-hardening mechanisms of Ti-0.3 wt%N alloy were comprehensively studied via deformation substructure observation and first-principles calculations. It is revealed that the contributions of nitrogen to the excellent strength/ductility balance in UFG Ti-0.3 wt%N were twofold. On one hand, nitrogen atoms inside the grains strongly impeded the motion of < a > dislocations on prismatic plane due to the shuffling of nitrogen from octahedral to hexahedral site, giving rise to a six-fold increase in the friction stress relative to pure Ti. Moreover, the greatly reduced stacking fault energy difference between prismatic and pyramidal planes in Ti-0.3 wt%N alloy facilitated an easier activation of < c + a > dislocations, which contributed to an enhanced strain-hardening rate. On the other hand, some nitrogen atoms segregated near the grain boundaries, a phenomenon discovered in α -titanium for the first time. These segregated nitrogen atoms served as an additional contributor to the high yield strength of UFG Ti-0.3 wt%N, by raising the barrier against dislocation slip transfer between grains. Our experimental and theoretical calculation work provide insights for the design of affordable high strength titanium without a large sacrifice of ductility, shedding lights on a more widespread use of this high strength to weight ratio material. Graphical abstract: Image, graphical abstract