Custom-designed heat treatment simultaneously resolves multiple challenges facing 3D-printed single-crystal superalloys. (October 2022)

• Record Type: Journal Article
• Authors: Lin, Sicong; Chen, Kai; He, Weifeng; Tamura, Nobumichi; Ma, En
• Is Part Of: Materials & design. Volume 222(2022)
• Publication Date: 2022-10
• Subjects: Ni-based superalloy single crystals -- Heat treatment -- Recovery -- Recrystallization -- Stray grain growth -- Chemical homogenization; Materials -- Periodicals; Engineering design -- Periodicals; Matériaux -- Périodiques; Conception technique -- Périodiques; Electronic journals; 620.11
• DOI: 10.1016/j.matdes.2022.111075
• Languages: English
• ISSNs: 0264-1275

Abstract

Graphical abstract: Highlights: 3D-printed Ni-superalloy single crystals face four major challenges ( R.A.S.H.) . Designed a single-step treatment to meet all the RASH requirements. Recovery to avoid recrystallization while preventing stray grain growth. Optimized annealing duration homogenizes chemical and precipitates distribution. Abstract: Single-crystal Ni-based superalloys are currently the material of choice for turbine blade applications, especially with the emerging additive manufacturing (AM) that facilitates the manufacture/repair of these single crystals. This promising AM route, however, comes with a dilemma: in the fusion and heat affected zones after e-beam or laser induced melting, one needs a solutionizing annealing to relieve the residual stresses and homogenize the chemical/microstructure. The super-solvus solutionizing temperature is usually adopted from the protocol for the cast superalloys, which almost always causes recrystallization and stray grain growth, resulting in a polycrystalline microstructure and degrading the high-temperature mechanical performance. Here we demonstrate a custom-designed post-printing heat treatment to replace the conventional super-solvus one. The recovery and relatively low temperature diminish the driving force for recrystallization and the movement of stray grain boundaries, without suffocating the chemical/microstructural homogenization thanks to the narrow dendrite width and short element segregation distance. The optimal duration of the heat treatment is proposed to achieve atomic-diffusion mediated chemical homogenization while limiting γ′-particle coarsening in the interdendritic regions. Our strategy makes it practically feasible to resolve several bottleneck problems with one processing/treatment, removing a seemingly formidable obstacle to effective additive manufacturing of superalloy single crystal products.