Development of the Large-Tonnage Pressure-Type Prestressed Anchor Cable with BFRP for Geotechnical Engineering and Its Mechanical Properties. (13th September 2022)

• Record Type: Journal Article
• Authors: Du, Zhigang; Li, Ning; Ding, Wuxiu; Tao, Yawen; Wu, Xiaolei; Guo, Jinjun; You, Peng; Wang, Chaoqin; Archbold, Paul; Mullarney, Brian; Xie, Bing
• Other Names: Shan-Jie Su Academic Editor.
• Is Part Of: Geofluids. Volume 2022(2022)
• Publication Date: 2022-09-13
• Subjects: Hydrogeology -- Periodicals; Sedimentary basins -- Periodicals; Fluids -- Migration -- Periodicals; Groundwater flow -- Periodicals; Geothermal resources -- Periodicals; Fluid dynamics -- Periodicals; Earth -- Crust -- Periodicals; 551.49
• DOI: 10.1155/2022/7467842
• Languages: English
• ISSNs: 1468-8115

Abstract

Abstract : Prestressed anchor cable is widely used in geotechnical engineering to control the displacement or landslide of an unstable slope. However, the traditional cable anchor is made of steel material, which is easy to get rust in a corrosive environment. Basalt fiber-reinforced plastics (BFRP) are a kind of emerging compound material, with a good performance of high strength, low weight, and anticorrosion. Herein, an innovative large-tonnage pressure-type prestressed anchor is made with BFRP. This large-tonnage BFRP anchor cable has seven bunch structures of the "BFRP-connector-strand." In each bunch of the "BFRP-connector-strand, " three BFRP tendons and one steel strand are connected inside a steel sleeve connector using the epoxy resin adhesive. The ultimate load-bearing capacity of this BFRP cable anchor can reach 202.38 tonnages. At the ultimate tensioning force condition, the strain of BFRP tendons for this large-tonnage BFRP anchor cable ranges from 1.51% to 1.76%. In the tensioning operation, there is a linear growth relationship between the tensioning force and the strain for this BFRP cable anchor. Once the tensioning force reaches the ultimate strength of this BFRP anchor cable, this cable will present system failure. This situation primarily results from the failure of the "BFRP-connector-strand." The failure modes of this BFRP anchor cable can be classified into three types: the steel strand rupture, the steel connector rupture, and the BFRP tendon rupture. During the tensioning operation, due to the length difference of the BFRP tendons, this large-tonnage BFRP cable anchor presents an end-off-axis effect. It makes the load bearing of the BFRP tendons 5.00~6.60 times larger than that of the no end-off-axis effect. Nevertheless, due to the plastic deformation of the end steel anchor sleeve, the influence of the end-off-axis effect decreases with the increase of applied tensioning force. The load-bearing capacity of this large-tonnage BFRP cable anchor reaches 87.70~91.50% of its theoretical value.