Evaluation of Cu-substituted La1.5Sr0.5NiO4+δ as air electrode for CO2 electrolysis in solid oxide electrolysis cells. Issue 21 (1st November 2022) - Wang, Shun
Abstract: Ruddlesden-Popper oxide, Cu-substituted La1.5 Sr0.5 NiO4+δ series materials (La1.5 Sr0.5 Ni1-x Cux O4+δ ; denoted as LSNCux ; x = 0, 0.1, 0.25, 0.5) are investigated as air electrodes in solid oxide electrolysis cells (SOECs) for electrolysis of CO2 . Room temperature crystal structure, electrical conductivity and oxygen exchange capacity, as well as electrochemical performance of LSNCux are comprehensively investigated. Among the series of samples, LSNCu0.25 half-cell exhibits the lowest polarization resistance value of 0.179 Ω cm 2 at 800 °C, which decreases by approximately 86.07% compared with that of LSN. In addition, the fuel electrode-supported single cell with LSNCu0.25 air electrode presents a high current density of 1.2 A cm −2 at 1.5 V under 30% CO–70% CO2 condition at 800 °C, which is 207% of LSN (0.58 A cm −2 ) under the same condition. Results show that the impressive catalytic activity for oxygen evolution reaction (OER) is ascribed to the improved electronic conductivity and oxygen exchange capacity. With Cu substitution for Ni-site, the contraction of Ni–O bond in NiO6 octahedron and increased concentration of charge carries owing to the oxidation of Ni 2+ to Ni 3+ are beneficial to the electron conduction. The formation of more interstitial oxygen as ionic compensation also favors the oxygen ion diffusion/exchange and greatly accelerates the charge transfer process. Furthermore, no degradation is observed for the single cell durability test at 750 °C for 50 h, which demonstrates the highly stable performance of LSNCu0.25 air electrode for electrolysis of CO2 .