Combining ensemble empirical mode decomposition with spectrum subtraction technique for heart rate monitoring using wrist-type photoplethysmography. (August 2015)

• Record Type: Journal Article
• Authors: Zhang, Yangsong; Liu, Benyuan; Zhang, Zhilin
• Is Part Of: Biomedical signal processing and control. Volume 21(2015)
• Page Start: 119
• Page End: 125
• Publication Date: 2015-08
• Subjects: Photoplethysmography (PPG) -- Heart rate (HR) monitoring -- Ensemble empirical mode decomposition (EEMD) -- Spectrum subtraction; Signal processing -- Periodicals; Biomedical engineering -- Periodicals; Signal Processing, Computer-Assisted -- Periodicals; Image Processing, Computer-Assisted -- Periodicals; Biomedical Engineering -- Periodicals; 610.28
• DOI: 10.1016/j.bspc.2015.05.006
• Languages: English
• ISSNs: 1746-8094

Abstract

Highlights: Heart rate (HR) monitoring using wrist-type PPG signals during physical exercise was examined. The proposed method combines ensemble empirical mode decomposition with spectrum subtraction technique. The proposed method provides satisfactory performance on twelve PPG datasets collected when the subjects were running with the peak speed of 15 km/h. The average absolute error of HR estimation was 1.83 beat per minute and the Pearson correlation was 0.989 between the ground-truth and estimated HR. Abstract: Photoplethysmography (PPG)-based heart rate (HR) monitoring is a promising feature in modern wearable devices. However, it is difficult to accurately track HR during physical exercise since PPG signals are vulnerable to motion artifacts (MA). In this paper, an algorithm is presented to combine ensemble empirical mode decomposition (EEMD) with spectrum subtraction (SS) to track HR changes during subjects' physical activities. In this algorithm, EEMD decomposes a PPG signal and an acceleration signal into intrinsic mode functions (IMFs), respectively. Then noise related IMFs are removed. Next the correlation coefficient is computed between the spectrum of the acceleration signal and that of the PPG signal in the band of [0.4 Hz–5 Hz]. If the coefficient is above 0.5, SS is used to remove the spectrum of the acceleration signal from the PPG's spectrum. Finally, a spectral peak selection method is used to find the peak corresponding to HR. Experimental results on datasets recorded from 12 subjects during fast running showed the superior performance of the proposed algorithm compared with a benchmark method termed TROIKA. The average absolute error of HR estimation was 1.83 beats per minute (BPM), and the Pearson correlation was 0.989 between the ground-truth and the estimated HR.