Comparative evaluation of Ni‐based bimetallic catalysts for dry reforming of methane at low temperature: The effect of alloy itself on performance. (8th April 2022)

• Record Type: Journal Article
• Authors: Lee, JeongA; Bae, Yonggyun; Hong, Kyungpyo; Hong, Jongsup
• Other Names: Bicer Yusuf guestEditor.
• Is Part Of: International journal of energy research. Volume 46:Number 8(2022)
• Page Start: 11228
• Page End: 11249
• Publication Date: 2022-04-08
• Subjects: activity -- alloy formation -- energy efficiency -- feasibility -- long‐term stability -- synergetic effect; Power resources -- Periodicals; Power (Mechanics) -- Periodicals; Power resources -- Research -- Periodicals; 621.042
• DOI: 10.1002/er.7923
• Languages: English
• ISSNs: 0363-907X

Abstract

Summary: Dry reforming of methane assisted by 5 wt% Ni‐X alloy catalysts (X: Co, Cu, Pd, and Rh) anchored on γ‐alumina is evaluated for comparing the synergetic effect of alloys at once as catalysts for dry reforming of methane at low temperatures of 400°C‐600°C. Characterization of catalysts confirms alloy formation, structural properties, and adsorption properties that affect the performance of each bimetallic catalyst. Catalytic performance is evaluated from the perspective of initial activity, syngas production and selectivity, long‐term stability, as well as energy efficiency at powder level not previously addressed, followed by post‐analysis for carbon formation. The results show that Ni‐Rh/Al2 O3 and Ni‐Co/Al2 O3 are highly active and stable during the reaction. Ni‐Rh/Al2 O3 shows higher CH4 and CO2 conversions at 550°C as 32.71% and 84.69% of those at equilibrium, respectively. Similarly, CH4 and CO2 conversions of Ni‐Co/Al2 O3 at 550°C are 26.17% and 71.76% of those at equilibrium. They exhibit better long‐term stability than a Ni monometallic catalyst, decreasing the degradation rate by 60% for Ni‐Rh/Al2 O3 and 40% for Ni‐Co/Al2 O3 . Such improvement is even more pronounced when the temperature decreases from 500°C to 400°C, implying their potential as catalysts for dry reforming of methane at low temperatures. However, for every performance indicator, Ni‐Pd/Al2 O3 and Ni‐Cu/Al2 O3 exhibit low performance. These tendencies are mainly attributed to the synergetic effect of alloy and apparent activation energies for reactions. Based on such experimental results, it is discussed that Ni‐Rh/Al2 O3 and Ni‐Co/Al2 O3 are feasible and promising catalysts for dry reforming of methane even at low temperatures. Abstract : This study aims to develop highly active and stable catalysts for the dry forming of methane at low temperatures and contribute to the commercialization of its advantages for the environment and chemical industries. The results obtained from this study suggest a candidate catalyst (Ni‐based bimetallic catalysts anchored on γ‐alumina) with high potential and feasibility as a low‐temperature (below 600°C) dry reforming of methane. This will promote its market deployment to replace current carbon‐intensive power production systems.