3D characterization of a nanostructured Al-Cu-Mg alloy. Issue 1 (1st July 2022)

• Record Type: Journal Article
• Authors: Zhu, Wanquan; Yang, Ran; Feng, Zongqiang; Wu, Guilin; Godfrey, Andrew; Huang, Xiaoxu
• Is Part Of: IOP conference series. Volume 1249:Issue 1(2022)
• Publication Date: 2022-07-01
• Subjects: Materials science -- Periodicals; 620.1105
• DOI: 10.1088/1757-899X/1249/1/012029
• Languages: English
• ISSNs: 1757-8981

Abstract

Abstract: Three-dimensional (3D) characterization of variations in crystallography and chemistry of nanostructured metals will provide vital information to understand their mechanical and thermal behaviours. This study applied a surface sliding friction treatment (SSFT) at liquid nitrogen temperature to produce nanostructured surface layers in a peak-aged Al-Cu-Mg alloy. The nanostructured surface was characterized by means of 3D orientation mapping in the transmission electron microscope (3D-OMiTEM) and atom probe tomography (APT). 3D-OMiTEM results revealed a lamellar structure with an average lamellar boundary spacing of 26 nm at the topmost surface layer (depth < 20 μm), which is much finer than normally achievable in commercial purity Al deformed to high strain levels. Based on the 3D-OMiTEM data, a five-parameter grain boundary character analysis was carried out. It was found that low angle grain boundaries dominate the nanoscale structure and that the grain boundary plane distribution of high angle lamellar grain boundaries shows a preference around {101}. APT analysis showed segregation of Cu and Mg atoms at lamellar boundaries, which is believed to play a role in stabilizing the boundaries and enhancing the structural refinement during SSFT.