Effects of artificial impeller blade wear on bubble–particle interactions using CFD (k–ε and LES), PIV, and 3D printing. (August 2022)

• Record Type: Journal Article
• Authors: Gomez-Flores, Allan; Heyes, Graeme W.; Ilyas, Sadia; Kim, Hyunjung
• Is Part Of: Minerals engineering. Volume 186(2022)
• Publication Date: 2022-08
• Subjects: Computational fluid dynamics -- Particle image velocimetry -- 3D printing -- Froth flotation -- Impeller blade wear; Mines and mineral resources -- Periodicals; Ressources minérales -- Périodiques; Mines and mineral resources; Periodicals; Electronic journals; 622
• DOI: 10.1016/j.mineng.2022.107766
• Languages: English
• ISSNs: 0892-6875

Abstract

Graphical abstract: Highlights: Curved surfaces were salient geometrical features on artificial impeller blade wear. LES was used to support simulations with the standard k – ε model. 3D printed impellers were used to conduct PIV measurements and flotation experiments. PIV and flotation results supported the effects of blade wear on recovery. Abstract: Wear reduces velocity and turbulence by reducing the volume of impeller blades; yet there is a lack of knowledge on flotation cells. Additionally, there is a lack of knowledge in the literature regarding the effect of blade wear on bubble–particle interactions. Hence, computational fluid dynamics simulations investigated artificial impeller blade wear of a laboratory–scale Denver cell. Simulations of chalcopyrite flotation showed that blade wear increased floatability of 10 μm particles by 1.4 %, but decreased that of 180 μm particles by 3.0 %. Accordingly, it is proposed that curved surfaces due to wear increased ε (volume–averaged ε [m 2 /s 3 ]: no–wear 20.5 and wear 25.8), increasing collision of fine particles and detachment of coarser particles. These were supported by results from large eddy simulation and particle image velocimetry measurements using three–dimensional (3D) printed impellers. Finally, experimental results from flotation experiments using 3D printed impellers and 250–300 μm methylated quartz confirmed a floatability decrease (2.1 %–3.8 %) due to wear.