Dynamic Vibrational Analysis on Areca Sheath fibre reinforced bio composites by Fast Fourier Analysis. (2018) - Chethan, M.R
Abstract: Natural fibre reinforced bio composites [6] are good alternative for conventional materials. Natural fibres are cheaper in cost, environmental friendly and biodegradable. In this project work the effect of varying fibre length is studied and Fast Fourier Technique is used for the analysis of dynamic frequency response. The naturally extracted areca sheath fibres are used as a reinforcement and epoxy L – 12 is used as polymer matrix. Fabrication is done by using hand lay-up method and compression molding technique at 100 – 110 bar pressure and 140 – 150°C temperature. Each specimen is cured for 24 h and then test specimens were cut according to ASTM standards i.e., 150 X 150 mm in length and breadth. The dynamic frequency response of specimens with varying fibre length of 29, 27 and 25 mm and thickness 4, 3.5 and 2 mm is obtained by modal analysis. Finite Element Analysis for all specimens is carried out by ANSYS 14.5 and results are compared with the experimental values. These natural areca fibre reinforced polymer matrix composites are defined for particular applications based up on the mechanical and vibrational characteristics obtain from the experimental results.