Low noise optimization of an electron beam current transformer for conventional radiotherapy up to ultra high dose rate irradiations. (1st August 2022)

• Record Type: Journal Article
• Authors: Lahaye, C.; Fontbonne, J.-M.; Salvador, S.
• Is Part Of: Journal of instrumentation. Volume 17:Number 8(2022)
• Publication Date: 2022-08-01
• Subjects: Charge induction -- Dosimetry concepts and apparatus -- Front-end electronics for detector readout -- Instrumentation for gamma-electron therapy; Scientific apparatus and instruments -- Periodicals; 502.84
• DOI: 10.1088/1748-0221/17/08/P08018
• Languages: English
• ISSNs: 1748-0221

Abstract

Abstract: Ultra high dose rate electron beams also known as FLASH radiotherapy is becoming of importance in several preclinial cancer treatment studies. However, due to the dose rate used during the irradiation sessions, no real time dose monitoring device exists to date. In this work, we present the development of a beam current transformer (BCT), from the choice of the ferromagnetic component and the realisation of the shielding to the design of a front-end electronics based on a trans-impedance circuit in order to perform a low noise optimization of the detector. The BCT prototype is able to monitor a beam current range from 1.2 μA to 200 mA with a rise time constant better than 20 ns and a droop rate of the signal below 0.05% · μs -1 . Preliminary in-situ measurements are also presented. The goal is to combine the BCT system which measure in real time the beam current, to an ionisation chamber monitoring the beam shape and position in order to provide a reliable dose monitoring system.