Prediction of strain, inter-layer interaction and critical current in CORC® wires under axial strain by T-A modeling. (1st October 2022)

• Record Type: Journal Article
• Authors: Wang, K; Gao, Y W; Anvar, V A; Radcliff, K; Weiss, J D; van der Laan, D C; Zhou, Y H; Nijhuis, A
• Is Part Of: Superconductor science & technology. Volume 35:Number 10(2022)
• Publication Date: 2022-10-01
• Subjects: HTS cable -- CORC® -- axial tensile load -- inter-layer interaction -- critical current reduction -- T-A method; Superconductivity -- Periodicals; Superconductors -- Periodicals; 537.623
• DOI: 10.1088/1361-6668/ac8a23
• Languages: English
• ISSNs: 0953-2048

Abstract

Abstract: Superconducting conductors on round core (CORC ® ) cables and wires can meet the needs of large high-field magnets, such as particle accelerators and compact nuclear fusion machines, due to their simple cabling process, high current-carrying capacity and reliable operation under high mechanical stresses. Many high-field magnets require CORC ® cables to carry a current of thousands of amperes in a background magnetic field exceeding 20 T. As a result, the large electromagnetic forces will deform the cable in the axial direction due to hoop stress and in the transverse direction by compressive stress. Therefore, it is essential to determine the irreversible deformation limit of the CORC ® cable under axial tensile load and optimize the cabling parameters to potentially extend this limit. Analytical and numerical methods are developed to assess the performance degradation of CORC ® wires under axial tensile load. The strain level, interlayer contact pressure and friction and their impact on the critical current are calculated by combining the mechanical response and the T-A method. Analyzing the results shows that the winding angle of the tape and the Poisson's ratio of the inner core are key factors affecting the irreversible tensile strain limit of CORC ® wires. The smaller the winding angle and the higher the Poisson's ratio of the inner core, the higher the irreversible tensile strain limit. For multi-layer CORC ® wires, the initial contact pressure caused by the cabling process must also be considered. The inter-layer interaction is coupled with the tape strain of each layer. The results of this research can serve as a basis for optimizing and designing CORC ® wires with extended irreversible strain limits.