Improved Fracture Toughness of Polycrystalline γ‐TiAl‐Based Intermetallic Alloys with a Favorable Deformation Mechanism of Twinning. Issue 9 (27th March 2022)

• Record Type: Journal Article
• Authors: Liu, Shiqiu; Luo, Yaofeng; Ding, Hongsheng; Chen, Ruirun; Guo, Jingjie; Fu, Hengzhi
• Is Part Of: Advanced engineering materials. Volume 24:Issue 9(2022)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2022-03-27
• Subjects: crack propagation -- fracture toughness -- heat treatment -- intermetallics -- twinning; Materials -- Periodicals; 620.11
• DOI: 10.1002/adem.202101710
• Languages: English
• ISSNs: 1438-1656

Abstract

Abstract : High‐density deformation nanotwins markedly strengthen TiAl‐based alloys; however, the improvement in strength generally leads to a reduction in fracture toughness for most structural materials. It is, therefore, necessary to investigate the benefits of high‐density deformation nanotwins for the improvement in fracture toughness of TiAl‐based alloys. Herein, the fracture toughness of two Ti‐45.5Al‐4Cr‐2.5Nb alloys with a favorable deformation mechanism of twinning (prepared by annealing the continuous casting (C. C.) alloy at 1250 °C and 1270 °C for different durations, respectively) is investigated and compared with that of the unannealed continuous casting (C. C.) alloy, in terms of room‐temperature (RT) tensile properties and microstructures. It is found that the two heat‐treated Ti‐45.5Al‐4Cr‐2.5Nb alloys exhibits a higher fracture toughness than the C. C. alloy. Shear ligaments and slip bands are the main toughening mechanisms for the two heat‐treated alloys; their generation is closely related to the enhancement in the plastic deformability of lamellar structures. In addition, the increase in (B2 + γ)‐coupled structures is found to impose a negative effect on the toughening of the investigated alloys. High‐density deformation nanotwins favor the improvement in fracture toughness of TiAl‐based alloys by improving their fracture strength and plastic deformability, while decreasing their work‐hardening exponent. Abstract : TiAl‐based alloys with a favorable deformation mechanism of twinning possess higher fracture toughness than the original alloy, shear ligaments, and slip bands are the primary toughening mechanisms. High‐density deformation nanotwins are regarded as much beneficial to toughening TiAl‐based alloys because their generation can markedly improve the fracture strength and plastic deformability, and decrease the work‐hardening exponent of TiAl‐based alloys.