Experimental study on the seismic behavior of RC shear walls after freeze-thaw damage. (1st March 2020)

• Record Type: Journal Article
• Authors: Rong, Xian-Liang; Zheng, Shan-Suo; Zhang, Yi-Xin; Zhang, Xiao-Yu; Dong, Li-Guo
• Is Part Of: Engineering structures. Volume 206(2020)
• Publication Date: 2020-03-01
• Subjects: Frost-damaged RC shear wall -- Seismic performance -- FTCs -- Concrete strength -- Axial load ratio; Structural engineering -- Periodicals; Structural analysis (Engineering) -- Periodicals; Construction, Technique de la -- Périodiques; Génie parasismique -- Périodiques; Pression du vent -- Périodiques; Earthquake engineering; Structural engineering; Wind-pressure; Periodicals; 624.105
• DOI: 10.1016/j.engstruct.2019.110101
• Languages: English
• ISSNs: 0141-0296

Abstract

Highlights: RC shear walls subjected to FTC are tested under low cyclic reversal loading. The effects of FTC on the seismic behavior of shear walls are studied. The seismic performance indexes of the RC shear wall decrease due to frost action. The shear deformation component increases due to frost action. A skeleton curve calculation model is proposed for frost-damaged RC shear walls. Abstract: Previous research shows that frost action represents one of the most dangerous threats to reinforced concrete (RC) structures. However, very few experimental studies have been performed on the seismic behavior of frost-damaged RC shear walls. Thus, this paper used the artificial climate rapid freeze-thaw technique to simulate the freeze-thaw environment. Successive freeze-thaw cycle tests and quasi-static tests were performed on eight RC shear wall specimens to investigate the seismic performance of frost-damaged RC shear walls. The key variables include the number of freeze-thaw cycles (FTCs), concrete strength and axial load ratio. The seismic behavior of test specimens was evaluated in terms of damage process, hysteretic behavior, load carrying capacity, deformation capacity, energy dissipation capacity, and shear deformation. The experimental results indicated that as the number of FTCs increased, the flexural-shear failure of the RC shear walls shifts from a flexure-dominated mode to a shear-dominated one. Meanwhile, the load carrying capacity, deformation capacity, and energy dissipation capacity gradually decreased. Furthermore, the freeze-thaw cycle can weaken the shear resistance of RC shear walls and can increase the average shear distortion and the ratio of shear deformation to the total deformation under different loading states. Based on the test results, a calculation equation was proposed for RC shear wall skeleton curves considering the influence of freeze-thaw damage and axial load ratio.