A 3D finite element modelling of crystalline anisotropy in rolling contact fatigue. (January 2018)

• Record Type: Journal Article
• Authors: Vijay, Akhil; Paulson, Neil; Sadeghi, Farshid
• Is Part Of: International journal of fatigue. Volume 106(2018)
• Page Start: 92
• Page End: 102
• Publication Date: 2018-01
• Subjects: Rolling contact fatigue -- Crystal anisotropy -- Finite elements; Materials -- Fatigue -- Periodicals; Materials -- Fatigue; Periodicals; 620.1122
• DOI: 10.1016/j.ijfatigue.2017.09.016
• Languages: English
• ISSNs: 0142-1123

Abstract

Highlights: 3D FEA model simulates material anisotropy in rolling contact fatigue (RCF). Stress concentrations occur at grain boundaries forming fatigue initiation locations. Grain boundary stresses averaging scheme illustrate that the finite element model is mesh independent. The estimated fatigue life scatter matches well with the fatigue life scatter obtained from the RCF experiments. Abstract: Rolling contact fatigue (RCF) is one of the primary modes of failure in bearings and in this study it is hypothesized and demonstrated that RCF is strongly influenced by inhomogeneity in polycrystalline material microstructure. This paper presents a three-dimensional modeling approach to include the effects of microstructure topology and material anisotropy in a polycrystalline microstructural bearing steel subject to RCF loading. A randomly generated 3D Voronoi tessellation is used to represent the microstructural topology of the material. A cubic material definition with random spatial orientation is specified for the material grains to simulate the polycrystalline anisotropy. The size of the RVE was chosen such that it represented the macroscopic linear elastic material properties of a polycrystalline aggregate. The semi-infinite domain is then subjected to a moving Hertzian pressure to simulate a load cycle. Due to inhomogeneity in the polycrystalline material local stress risers occur at the grain boundaries, however, in general, the locations of the maximum shear stresses compare well to the experimental RCF results readily available in literature. Elemental shear stresses averaging scheme was employed to illustrate that the finite element model is mesh independent. The estimated fatigue life scatter obtained from the inhomogeneous polycrystalline material model corroborates well with the fatigue life scatter obtained from the RCF experiments.