Effect of low-temperature catalytic hydrothermal liquefaction of Spirulina platensis. (1st January 2020)
- Record Type:
- Journal Article
- Title:
- Effect of low-temperature catalytic hydrothermal liquefaction of Spirulina platensis. (1st January 2020)
- Main Title:
- Effect of low-temperature catalytic hydrothermal liquefaction of Spirulina platensis
- Authors:
- Kandasamy, Sabariswaran
Zhang, Bo
He, Zhixia
Chen, Haitao
Feng, Huan
Wang, Qian
Wang, Bin
Ashokkumar, Veeramuthu
Siva, Subramanian
Bhuvanendran, Narayanamoorthy
Krishnamoorthi, M. - Abstract:
- Abstract: In this work, the cerium oxide (CeO2 ) nanocatalyst was employed as a catalyst to enhance the hydrothermal liquefaction (HTL) of microalgae to bio-oil conversion. The HTL optimized parameters were obtained from response surface methodology (RSM). The Spirulina Platensis is blue-green algae were used to convert into bio-oil. The major processing method for bio-oil conversion was designed based on three key parameters, such as temperature, residence time and catalyst concentration. A remarkable enhancement of bio-oil production was observed for 0.20 g of CeO2 catalyzed HTL at 250 °C for 30 min, and around 26% of conversion was achieved which is higher than catalyst-free HTL reaction (16%). The synthetic CeO2 nanostructure was characterized using scanning electron microscopy (SEM), field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), brunauer-emmett-teller surface area (BET), X-ray powder diffraction (XRD) and thermal gravimetric analysis (TGA). The chemical composition of bio-oil was analyzed by gas chromatography-mass spectrometry (GC-MS) and the functional group analysis was done using fourier transform-infra red spectroscopy (FT-IR). The obtained results clearly reveal that the major chemical constituents such as hydrocarbons (7.55%), amino acids (36.69%) and nitrogen compounds (21.58%) for the bio-oil increased during CeO2 catalyzed HTL reaction. This investigation depicts that, the CeO2 nanoparticleAbstract: In this work, the cerium oxide (CeO2 ) nanocatalyst was employed as a catalyst to enhance the hydrothermal liquefaction (HTL) of microalgae to bio-oil conversion. The HTL optimized parameters were obtained from response surface methodology (RSM). The Spirulina Platensis is blue-green algae were used to convert into bio-oil. The major processing method for bio-oil conversion was designed based on three key parameters, such as temperature, residence time and catalyst concentration. A remarkable enhancement of bio-oil production was observed for 0.20 g of CeO2 catalyzed HTL at 250 °C for 30 min, and around 26% of conversion was achieved which is higher than catalyst-free HTL reaction (16%). The synthetic CeO2 nanostructure was characterized using scanning electron microscopy (SEM), field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), brunauer-emmett-teller surface area (BET), X-ray powder diffraction (XRD) and thermal gravimetric analysis (TGA). The chemical composition of bio-oil was analyzed by gas chromatography-mass spectrometry (GC-MS) and the functional group analysis was done using fourier transform-infra red spectroscopy (FT-IR). The obtained results clearly reveal that the major chemical constituents such as hydrocarbons (7.55%), amino acids (36.69%) and nitrogen compounds (21.58%) for the bio-oil increased during CeO2 catalyzed HTL reaction. This investigation depicts that, the CeO2 nanoparticle could be employed as a potential candidate to accelerate the bio-oil conversion through HTL at low temperature from Spirulina platensis . … (more)
- Is Part Of:
- Energy. Volume 190(2020)
- Journal:
- Energy
- Issue:
- Volume 190(2020)
- Issue Display:
- Volume 190, Issue 2020 (2020)
- Year:
- 2020
- Volume:
- 190
- Issue:
- 2020
- Issue Sort Value:
- 2020-0190-2020-0000
- Page Start:
- Page End:
- Publication Date:
- 2020-01-01
- Subjects:
- Hydrothermal liquefaction -- Spirulina platensis -- Low temperature catalytic HTL -- Response surface methodology -- Central composite design -- Energy recovery
Power resources -- Periodicals
Power (Mechanics) -- Periodicals
Energy consumption -- Periodicals
333.7905 - Journal URLs:
- http://www.elsevier.com/journals ↗
- DOI:
- 10.1016/j.energy.2019.116236 ↗
- Languages:
- English
- ISSNs:
- 0360-5442
- Deposit Type:
- Legaldeposit
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library DSC - 3747.445000
British Library DSC - BLDSS-3PM
British Library HMNTS - ELD Digital store - Ingest File:
- 23153.xml