Experimental study on an innovative enthalpy recovery technology based on indirect flash evaporative cooling. (25th January 2018)

• Record Type: Journal Article
• Authors: Nie, Jinzhe; Yuan, Shu; Fang, Lei; Zhang, Qunli; Li, Deying
• Is Part Of: Applied thermal engineering. Volume 129(2018)
• Page Start: 22
• Page End: 30
• Publication Date: 2018-01-25
• Subjects: Building ventilation -- Enthalpy recovery -- Indirect evaporative cooling -- Flash evaporation -- Atomizing humidification; Heat engineering -- Periodicals; Heating -- Equipment and supplies -- Periodicals; Periodicals; 621.40205
• DOI: 10.1016/j.applthermaleng.2017.09.139
• Languages: English
• ISSNs: 1359-4311

Abstract

Highlights: An enthalpy recovery technology based on IFEC was proposed. The IFEC system combined ultrasonic atomizer with plate heat exchanger. A prototype unit of the IFEC enthalpy recovery technology was developed. Up to 71% of enthalpy recover efficiency could be achieved with the IFEC unit. More than 50% of enthalpy recovered was contributed by moisture condensation. Abstract: An indirect flash evaporative cooling enthalpy recovery technology used for building ventilation was proposed based on counter flow plate heat exchanger combing with ultrasonic atomizer. The technology is aimed at enhancing enthalpy recover efficiency and preventing contaminant transfer of heat recovery unit. The principle of the technology is to over saturate indoor exhaust air by ultrasonic atomizing humidification. The evaporation of ultrafine mists cools down indoor exhaust air to its wet-bulb temperature and makes not only sensible heat transfer but also moisture condensed in outdoor supply air to realize total heat recovery. Compared with conventional indirect evaporative cooling, the application of ultrasonic atomizing enhances cooling effect through increasing water mists evaporation area and decreasing heat transfer resistance between exhaust air and supply air. No mass permeation, carrying-over or sorption occurs in this heat exchange process which guarantees no contaminant transfer from exhaust air to supply air. A prototype unit of the proposed technology was developed and tested in climate chambers. Temperatures and humidity ratios at inlets and outlets of the heat recovery unit were measured to investigate and analyze its energy recover efficiencies. The results showed that in hot and humid climate, up to 71% of total heat recover efficiency could be achieved by the prototype unit, and more than 50% of the enthalpy recovered was contributed by moisture condensation in the outdoor supply air.