Influence of the surface roughness of crushed natural aggregates on the microhardness of the interfacial transition zone of concrete with mineral admixtures and polymer latex. (20th April 2018)

• Record Type: Journal Article
• Authors: Qudoos, Abdul; Atta-ur-Rehman, ; Kim, Hong Gi; Ryou, Jae-Suk
• Is Part Of: Construction & building materials. Volume 168(2018)
• Page Start: 946
• Page End: 957
• Publication Date: 2018-04-20
• Subjects: Surface roughness -- Interfacial transition zone -- Microstructure -- Supplementary cementitious materials -- Polymers -- SEM-EDS; Building materials -- Periodicals; 624.18
• DOI: 10.1016/j.conbuildmat.2018.02.205
• Languages: English
• ISSNs: 0950-0618

Abstract

Graphical abstract: Highlights: Influence of surface roughness of crushed natural coarse aggregate with and without SCMs on ITZ was investigated. Aggregate with higher surface roughness indicated higher microhardness values. Microstructure enhancement was greatest for metakaolin, followed by silica fume, slag, fly ash, and finally latex. Abstract: Aggregate surface roughness has a significant effect on the interfacial transition zone of concrete. For this study, concrete specimens were prepared from five crushed natural coarse aggregates with varying surface roughnesses obtained from five different sources. The influence of polymer latex and mineral admixtures such as metakaolin, silica fume, slag, and fly ash were also studied. The effect of surface roughness on the interfacial transition zone was characterized by microhardness testing. The microhardness test results were validated via energy-dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM) analysis. The results showed that surface roughness has a prominent effect on microhardness of the transition zone and the effect significantly increases with the addition of cementitious materials. Polymer latex showed a slight influence on the microhardness while the effect of cementitious materials was found to be profoundly increased.