Mechanisms for diffusion-driven growth of cavitating wing-tip vortices. (November 2022)
- Record Type:
- Journal Article
- Title:
- Mechanisms for diffusion-driven growth of cavitating wing-tip vortices. (November 2022)
- Main Title:
- Mechanisms for diffusion-driven growth of cavitating wing-tip vortices
- Authors:
- Nanda, Swaraj
Westerweel, Jerry
van Terwisga, Tom
Elsinga, Gerrit - Abstract:
- Abstract: Following their inception, vortex cavities emanating from stationary wing tips in cavitation tunnels are often observed to grow. These effects are usually attributed to the free and dissolved non-condensable gases in the liquid. However, a detailed mechanism for the cavity's growth is not known. Consequently, the repeatability of vortex cavitation in different flow facilities is generally poor. The main aim of our work is to highlight the contribution of dissolved gases to the cavity's growth, hence addressing water-quality influence in nuclei-depleted conditions. A model is provided for a steady-state diffusion-driven mechanism that transports dissolved gases from the surrounding liquid into the vortex cavitation through a diffusion layer located outside its interface. The model results show that the cavity grows uncontrollably when the dissolved gas concentration in the liquid is saturated or oversaturated relative to its saturation level at ambient pressure conditions ( c ∞ / c s a t ≥ 1 ). In addition, it is shown that stable cavity sizes can be achieved when the c ∞ / c s a t < 1 . The predictions in the range 1 . 04 ≤ c ∞ / c s a t ≤ 1 . 33 are compared with experimental data and infer either of the two geometries for the diffusion layer: (i) a 5 μ m thin film approximated by a hollow cylinder around the cavity, or (ii) one that evolves like a boundary layer along the axis of the cavity. For the latter modeling approach, the observed length of the cavity wasAbstract: Following their inception, vortex cavities emanating from stationary wing tips in cavitation tunnels are often observed to grow. These effects are usually attributed to the free and dissolved non-condensable gases in the liquid. However, a detailed mechanism for the cavity's growth is not known. Consequently, the repeatability of vortex cavitation in different flow facilities is generally poor. The main aim of our work is to highlight the contribution of dissolved gases to the cavity's growth, hence addressing water-quality influence in nuclei-depleted conditions. A model is provided for a steady-state diffusion-driven mechanism that transports dissolved gases from the surrounding liquid into the vortex cavitation through a diffusion layer located outside its interface. The model results show that the cavity grows uncontrollably when the dissolved gas concentration in the liquid is saturated or oversaturated relative to its saturation level at ambient pressure conditions ( c ∞ / c s a t ≥ 1 ). In addition, it is shown that stable cavity sizes can be achieved when the c ∞ / c s a t < 1 . The predictions in the range 1 . 04 ≤ c ∞ / c s a t ≤ 1 . 33 are compared with experimental data and infer either of the two geometries for the diffusion layer: (i) a 5 μ m thin film approximated by a hollow cylinder around the cavity, or (ii) one that evolves like a boundary layer along the axis of the cavity. For the latter modeling approach, the observed length of the cavity was much larger than that required to match with the experimental data, skewing a preference to the thin-film assumption. In the undersaturated regime ( c ∞ / c s a t = 0 . 14 & 0.39), the proposed model has a qualitative agreement with the data of Briançon-Marjollet and Merle (1996). Highlights: Cavitation tunnels water quality management is non-standardized across facilities. Long-time observations of the size of vortex-cavities have only been reported by. Growth behavior of the vortex cavity was found to be fairly repeatable in nuclei depleted. Cavity growth following inception can be described as a diffusion dominant phenomenon. … (more)
- Is Part Of:
- International journal of multiphase flow. Volume 156(2022)
- Journal:
- International journal of multiphase flow
- Issue:
- Volume 156(2022)
- Issue Display:
- Volume 156, Issue 2022 (2022)
- Year:
- 2022
- Volume:
- 156
- Issue:
- 2022
- Issue Sort Value:
- 2022-0156-2022-0000
- Page Start:
- Page End:
- Publication Date:
- 2022-11
- Subjects:
- Vortex cavitation -- Dissolved gas -- Diffusion modeling
Multiphase flow -- Periodicals
Écoulement polyphasique -- Périodiques
Multiphase flow
Periodicals
620.1064 - Journal URLs:
- http://www.sciencedirect.com/science/journal/03019322 ↗
http://www.elsevier.com/journals ↗ - DOI:
- 10.1016/j.ijmultiphaseflow.2022.104146 ↗
- Languages:
- English
- ISSNs:
- 0301-9322
- Deposit Type:
- Legaldeposit
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library DSC - 4542.366000
British Library DSC - BLDSS-3PM
British Library HMNTS - ELD Digital store - Ingest File:
- 23062.xml