Management of waste printed circuit boards via supercritical water technology. (25th September 2022)

• Record Type: Journal Article
• Authors: Botelho Meireles de Souza, Guilherme; Bisinotto Pereira, Mariana; Francisco dos Santos, Lucas; Gonçalves Alonso, Christian; Jegatheesan, Veeriah; Cardozo-Filho, Lucio
• Is Part Of: Journal of cleaner production. Volume 368(2022)
• Publication Date: 2022-09-25
• Subjects: Electronic waste -- Depolymerization -- Metal recovery -- Organic degradation -- Printed circuit boards -- Supercritical water; Factory and trade waste -- Management -- Periodicals; Manufactures -- Environmental aspects -- Periodicals; Déchets industriels -- Gestion -- Périodiques; Usines -- Aspect de l'environnement -- Périodiques; 628.5
• DOI: 10.1016/j.jclepro.2022.133198
• Languages: English
• ISSNs: 0959-6526

Abstract

Abstract: In this study, the application of the supercritical water technology on the management of waste printed circuit boards (PCBs) obtained from small information technology (IT) and communication equipment was conducted. Initially, an extensive recycling-oriented characterization of waste printed circuit boards was conducted through a combination of several physicochemical analyzes such as MP-AES, XRF, TG/DTA, CHNS elemental analysis, SEM and XRD. Afterwards, at supercritical conditions of water (Tc > 374.29 °C and Pc > 22.089 MPa), the optimal conditions for the degradation of the organic polymers present in the waste PCBs were defined by a response surface methodology. A complete organic degradation rate (ODR ) was achieved at 600 °C, reaction time of 60 min, waste PCBs load of 15 g and flow-rate of 5 mL min −1 . After the removal of the organic polymers, the metals were liberated, and the metal recovery efficiency (MRE ) reached values higher than 90% at all evaluated conditions. Then, initial insights on the subsequent treatment of the liquid decomposition by-products generated during the supercritical water (ScW) processing of waste PCBs were provided. A total organic carbon reduction of 99.88% was achieved via the ScW oxidation process using the same experimental apparatus. The treated solution was successfully re-used in the ScW processing of waste PCBs instead of clean water. Moreover, hydrogen, methane, CO2, and CO were identified as the major gaseous products associated to the supercritical water treatment of waste PCBs. Finally, a novel strategy to enhance the production of combustible gases, through the addition of ethanol and glycerol, and increase the economic feasibility of the supercritical water processing of waste PCBs was proposed. Graphical abstract: Image 1 Highlights: Gold content in the waste PCBs was 30 times higher than their natural sources. Metal recovery efficiency superior to 90% was observed for all evaluated conditions. A complete decomposition of the organic content in waste PCBs was achieved. The addition of co-solvents enhanced the production of gases of industrial interest. The ScW treatment of the waste PCBs liquid decomposition by-products was investigated.