A Lead-Free Spiral Bimorph Piezoelectric MEMS Energy Harvester for Enhanced Power Density. Issue 5 (3rd September 2021)

• Record Type: Journal Article
• Authors: Butram, Vicky; Mishra, Ashutosh; Naugarhiya, Alok
• Is Part Of: IETE technical review. Volume 38:Issue 5(2021)
• Page Start: 537
• Page End: 546
• Publication Date: 2021-09-03
• Subjects: Bimorph energy harvester -- MEMS -- Power density -- Spiral cantilever -- ZnO; Telecommunication -- Periodicals; Electronics -- Periodicals; Electronics; Telecommunication; Periodicals; 621.38
• DOI: 10.1080/02564602.2020.1799876
• Languages: English
• ISSNs: 0256-4602

Abstract

Abstract : Tiny sensor nodes are the demand of smart and intelligent systems. These sensor nodes require on-board self-powered generating systems. Also, such generators should have lesser size. MEMS energy harvesters are profoundly used as the on-board self-powered generators. However, the size constrain imposes an important design trade-off on such devices. This trade-off is in-between areal dimension and the resonant frequency. In this paper, we have proposed an efficient bimorph energy harvester design which produces higher power density at very low resonance frequency. We have considered the poisonous behavior of lead-based devices as well and proposed lead-free designs in our work. The proposed design consists of a bimorph square plate of 2.25 mm 2 with two Zinc Oxide (ZnO) layers of 0.5 µm each sandwiched a copper electrode layer of 1 µm. A spiral cut of 5 µm thickness is made over the plate in order to form a fixed free beam structure. Furthermore, without the inclusion of tip mass, the resonant frequency of the beam is controlled by varying the number of spiral turns. Our proposed design outperformed the previous designs by producing maximum output power of 15 nW at 110 Hz with seven spiral turns with very lower active volume. Also, it has a normalized volumetric power density of 3 × 10 −2 µW/mm 3 g 2 Hz.