New insights on the removal of diclofenac and ibuprofen by CWPO using a magnetite-based catalyst in an up-flow fixed-bed reactor. (1st March 2021)

• Record Type: Journal Article
• Authors: Huaccallo-Aguilar, Y.; Diaz de Tuesta, J.L.; Álvarez-Torrellas, S.; Gomes, H.T.; Larriba, M.; Ovejero, G.; García, J.
• Is Part Of: Journal of environmental management. Volume 281(2021)
• Publication Date: 2021-03-01
• Subjects: Central composite design -- Chemical oxygen demand -- Diclofenac -- Ibuprofen -- Magnetic catalyst -- Total organic carbon; Environmental policy -- Periodicals; Environmental management -- Periodicals; Environment -- Periodicals; Ecology -- Periodicals; 363.705
• DOI: 10.1016/j.jenvman.2020.111913
• Languages: English
• ISSNs: 0301-4797

Abstract

Abstract: This research has been focused on the removal of two anti-inflammatory drugs, diclofenac (DCF) and ibuprofen (IBU), by a continuous catalytic wet peroxide oxidation (CWPO) process using a lab-synthesized nanomagnetic catalyst (Fe3 O4 /MWCNTs). The central composite rotatable design (CCRD) method was used to study the effect of DCF and IBU concentration (expressed as theoretical oxygen demand ( ThOD ) between 0 and 52.5 mg L −1 ) and of the feed stream pH (from 3 to 7) on the removal of total organic carbon (TOC) and the concentration of aromatic compounds (Arm) and total phenolic compounds (TP) by CWPO. It could be observed that DCF was preferably removed from the DCF-IBU aqueous mixture at pH values ranging from 3 to 5. In addition, feed stream pH had a significant effect on the pollutants removal, as well as on TOC, TP and aromatic compounds removal, observing an increasing in the pollutants degradation when feed stream pH decreased from 7 to 3. Quadratic models predicted for response variable, such as TOC, TP and aromatic compounds removal, and their maximum model-predicted removal values were of 90.0, 80.2 and 90.0%, respectively. Finally, as a proof of concept, three environmentally-relevant aqueous matrices, spiked with DCF-IBU mixture, were treated. In this case, relatively high TOC degradation values were found after 20 h reaction time (ca. 57.7, 73.9 and 54.5% in surface water, WWTP effluent and hospital wastewater, respectively). This work deals the first study about DCF-IBU removal in aqueous solution by CWPO, as well as a continuous study using real wastewater that allow to extend the experimental results to a real scenario. Graphical abstract: Image 1 Highlights: Efficient removal of DCF-IBU from water was obtained by continuous CWPO process. Optimization of CWPO process was accomplished using Response Surface Methodology. Synthesized catalyst revealed an outstanding activity for DCF-IBU mixture treatment. High TOC degradation was found by CWPO of aqueous matrices spiked with DCF-IBU.