Investigation on Mechanical Properties and Reaction Characteristics of Al-PTFE Composites with Different Al Particle Size. (14th March 2018)

• Record Type: Journal Article
• Authors: Wu, Jia-xiang; Fang, Xiang; Gao, Zhen-ru; Wang, Huai-xi; Huang, Jun-yi; Wu, Shuang-zhang; Li, Yu-chun
• Other Names: Luo Zhiping Academic Editor.
• Is Part Of: Advances in materials science and engineering. Volume 2018(2018)
• Publication Date: 2018-03-14
• Subjects: Materials science -- Periodicals; Materials science; Periodicals; 620.11
• DOI: 10.1155/2018/2767563
• Languages: English
• ISSNs: 1687-8434

Abstract

Abstract : Al-PTFE (aluminum-polytetrafluoroethylene) serves as one among the most promising reactive materials (RMs). In this work, six types of Al-PTFE composites with different Al particle sizes (i.e., 50 nm, 1∼2 μ m, 6∼7 μ m, 12∼14 μ m, 22∼24 μ m, and 32∼34 μ m) were prepared, and quasistatic compression and drop weight tests were conducted to characterize the mechanical properties and reaction characteristics of Al-PTFE composites. The reaction phenomenon and stress-strain curves were recorded by a high-speed camera and universal testing machine. The microstructure of selected specimens was anatomized through adopting a scanning electron microscope (SEM) to correlate the mesoscale structural characteristics to their macroproperties. As the results indicated, in the case of quasistatic compression, the strength of the composites was decreased (the yield strength falling from 22.7 MPa to 13.6 MPa and the hardening modulus declining from 33.3 MPa to 25 MPa) with the increase of the Al particle size. The toughness rose firstly and subsequently decreased and peaked as 116.42 MJ/m 3 at 6∼7 μ m. The reaction phenomenon occurred only in composites with the Al particle size less than 10 μ m. In drop weight tests, six types of specimens were overall reacted. As the Al particle size rose, the ignition energy of the composites enhanced and the composites turned out to be more insensitive to reaction. In a lower strain rate range (10 −2 ·s −1 ∼10 2 ·s −1 ), Al-PTFE specimens take on different mechanical properties and reaction characteristics in the case of different strain rates. The formation of circumferential open cracks is deemed as a prerequisite for Al-PTFE specimens to go through a reaction.