Interface regulation effects on mechanical behavior of heterostructure Ti6Al4V/TiAl-based laminated composite sheets. Issue 18 (15th September 2022)

• Record Type: Journal Article
• Authors: Wang, Bo; Ai, Taotao; Wang, Taotao; Li, Wenhu; Jing, Ran; Zou, Xiangyu; Deng, Zhifeng; Zhao, Zhongguo; Zhao, Kun; Liu, Gang
• Is Part Of: Ceramics international. Volume 48:Issue 18(2022)
• Page Start: 25984
• Page End: 25995
• Publication Date: 2022-09-15
• Subjects: Laminated composite sheets -- TiAl-Based intermetallic -- Interface regulation -- Mechanical behavior -- Crack propagation; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2022.05.278
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: Design of architectured composites with layered-ordered structure can solve the strength-toughness mismatch problem of structural materials. In the present study, heterostructure Ti6Al4V/TiAl laminated composite sheets with different thicknesses of interface layer and TiAl composite layer were successfully produced by hot-pressing technology. The effects of interface regulation and laminated structure on their mechanical properties, crack propagation, and fracture behavior were studied. The results indicated that compressive strength of the sheets increased with the decrease in interface thickness. Compressive strength of TiAl composite sheet with thicker composite layer reached 1481.55 MPa at the arrester orientation with sintering holding time of 40 min, which was 25.96% higher than that of the sheet obtained at 120 min. Analysis indicated that the interface area transferred stress through slip bands and through-interface cracks. Compressive strength at the divider orientation reached 1443.06 MPa, which was 45.78% higher than that of the sheet obtained at 120 min. In this case, the interface area transferred stress through slip bands and along-interface cracks. For TiAl composite sheets with thinner composite layer, compressive strength was further improved to 1631.01 MPa and 1594.66 MPa at the arrester and divider orientations with sintering holding time of 40 min, respectively. The ductile metal layer exerted a significant toughening effect. Both interface regulation and laminated structure transformation could enhance the hetero-deformation induced (HDI) strengthening and improve the comprehensive mechanical properties of the composite sheets.