Influence of multi-walled carbon nanotubes (MWCNTs) content on metal friction and wear in thermally cracked carbon black (CBp) formulation system during mixing. (September 2022) - Han, Deshang
Abstract: As the essential mixing equipment, long hours of work can cause wear and tear on the end face of the compactor. The wear of the end faces leads to an increase in the gap between the chamber and the end faces, which leads to leakage, reduces the mixing effect, and ultimately affects the rubber properties. Therefore, it is necessary to study the end face metal wear during the mixing process. Thermally cracked carbon black, as recycled material for scrap rubber, can be used as a substitute for other carbon blacks in some fields, vastly reducing the production cost and promoting the reuse of scrap rubber. In this paper, thermally cracked carbon black (CBp) was mixed with multi-walled carbon nanotubes (MWCNTs) and added rubber by mechanical blending to obtain CBp/MWCNTs composites. The synergistic mechanism of CBp and MWCNTs was investigated to analyze the effect of CBp/MWCNTs ratios on the frictional wear of metal on the end face of the compactor. The results showed that MWCNTs cooperated with CBp particles to form a three-dimensional "grape bunch" network structure. On the one hand, the three-dimensional "grape bunch" network structure can adsorb CBp particles to promote the dispersion of CBp particles. On the other hand, the three-dimensional "grape bunch" network structure can also hinder the overflow of aromatic oil and affect oil film formation. At the same time, the three-dimensional "grape bunch" network structure can also form a physical isolation layer between the rubber and the metal. This significantly influences the degree of CBp particle dispersion, friction coefficient, metal surface roughness, and metal wear. It seems that the synergistic effect between MWCNTs and CBp particles is maximized when the content of MWCNTs in CBp/MWCNTs composites is 4 phr, the area of CBp/MWCNTs three-dimensional mesh is maximized, the dispersion of CBp particles is the best, and the wear of CBp/MWCNTs composites on metal is the lowest. Highlights: As the essential mixing equipment, long hours of work can cause wear and tear on the end face of the compactor. The effect of the synergistic effect of CBp and MWCNTs on the friction and wear of end-face metal was analyzed. The results showed that MWCNTs cooperated with CBp particles to form a three-dimensional "grape bunch" network structure.