Composite coating by TIG cladding with different rare earth oxides. (4th March 2022)

• Record Type: Journal Article
• Authors: Kumar, Monty; Kumar, Shakti; Jha, Kailash; Mandal, Amitava
• Is Part Of: Surface engineering. Volume 38:Number 3(2022)
• Page Start: 271
• Page End: 287
• Publication Date: 2022-03-04
• Subjects: TIG -- cladding -- titanium -- micro-hardness -- wear -- rare-earth -- microstructure -- coating; Surfaces (Technology) -- Periodicals; Coatings -- Periodicals; 620.4405
• DOI: 10.1080/02670844.2022.2080901
• Languages: English
• ISSNs: 0267-0844

Abstract

ABSTRACT: In this study, composite coating with different rare earth oxides has been performed to enhance the surface, mechanical and tribological properties of titanium alloy using the TIG cladding process. Three different rare earth oxides, CeO2, La2 O3 and Y2 O3 were used in pairwise combination with WC and Ni powder. The cladding thickness, microstructure, phase analysis, microhardness and friction wear of coated samples were examined. The experimental results showed that mainly hard phases like NiTi and AlTi2 C were found in coatings. The sample prepared with RE oxides refines the coating grains and enhances the mechanical and tribological properties. The wear test analysis reveals a considerable decrease in coefficient of friction (COF). The mechanism for the wear of coating was adhesion. The coating done with CeO2 and La2 O3 has the highest microhardness (870 HV0.5 ) and wear resistance (COF of 0.22), which confirmed that this combination of RE oxide is appropriate for surface modification.