Air‐Processed Carbon‐Based Cs0.5FA0.5PbI3–Cs4PbI6 Heterostructure Perovskite Solar Cells with Efficiency Over 16%. Issue 7 (10th April 2022) - Huang, Zhaoshuai
Abstract : The preparation of low‐cost, high‐stability cell devices is the primary trend in the future development of perovskite solar cells (PSCs). The hole transport layer (HTL)‐free carbon electrode‐based PSCs (C‐PSCs) based on methylamine (MA) free perovskites prepared in the ambient air environment is expected to realize this goal. In MA‐free perovskites represented by Cs x FA1– x PbI3, although the increase of Cs content increases the bandgap, Cs x FA1– x PbI3 with high Cs content has superior stability. Herein, a hot flow‐assisted (HFA) spin‐coating method to prepare Cs0.5 FA0.5 PbI3 films in the ambient air environment with a wide relative humidity operation window is proposed. Compared with the traditional antisolvent method that requires a dry processing environment, the HFA method can easily prepare high‐quality Cs0.5 FA0.5 PbI3 films in a high‐humidity ambient air environment. In addition, it is found that the presence of trace amount of Cs4 PbI6 can not only passivate the defects of Cs0.5 FA0.5 PbI3 but also suppress the undesired phase transition. As a result, the in situ formed Cs0.5 FA0.5 PbI3 –Cs4 PbI6 heterostructure film corresponds to better stability and higher photovoltaic performance than the plain Cs0.5 FA0.5 PbI3 film. The efficiency of the assembled champion C‐PSCs is up to 16.30%, which is currently the highest efficiency for MA‐ and HTL‐free low‐temperature C‐PSCs. Abstract : Herein, a hot‐flow‐assisted spin‐coating method is proposed to prepare Cs0.5 FA0.5 PbI3 films in the humid air environment. The presence of trace amount Cs4 PbI6 not only passivates the defects but also improves the stability of Cs0.5 FA0.5 PbI3 . The carbon electrode–based perovskite solar cells (C‐PSCs) with Cs0.5 FA0.5 PbI3 –Cs4 PbI6 heterostructure film show an efficiency of 16.30%, which is the highest for methylamine‐free low‐temperature C‐PSCs.