Optimal trajectory planning of industrial robot for improving positional accuracy. Issue 1 (21st October 2019)

• Record Type: Journal Article
• Authors: Rout, Amruta; BBVL, Deepak; Biswal, Bibhuti B.; Mahanta, Golak Bihari
• Is Part Of: Industrial robot. Volume 48:Issue 1(2021)
• Page Start: 71
• Page End: 83
• Publication Date: 2019-10-21
• Subjects: Robot arm -- Dynamic parameter -- Kinematic Parameter -- NSGA-II with ASF -- Total travel time -- Trajectory path; Robots, Industrial -- Periodicals; Machinery in the workplace -- Periodicals; 629.892
• DOI: 10.1108/IR-07-2019-0148
• Languages: English
• ISSNs: 0143-991X

Abstract

Abstract : Purpose: The purpose of this paper is to improve the positional accuracy, smoothness on motion and productivity of industrial robot through the proposed optimal joint trajectory planning method. Also a new improved algorithm, i.e. non-dominated sorting genetic algorithm-II (NSGA-II) with achievement scalarizing function (ASF) has been proposed to obtain better optimal results compared to previously used optimization methods. Design/methodology/approach: The end effector positional errors can be reduced by limiting the uncertainties of dynamic parameter variations like torque rate of joints. The jerk induced in robot joints due to acceleration variations are need to be minimized which otherwise induces vibrations in the manipulator that causes deviation in the encoders. But these lead to a vast increase in total travel time which affects the cost function of trajectory planning. Therefore, these three objectives need to be minimized individually so that an optimal trajectory path can be achieved with minimum positional error. Findings: The simulation results have been obtained by running the proposed hybrid NSGA-II with ASF in MATLAB R2017a software. The optimal time intervals have been used to calculate jerk, acceleration and torque values for consecutive points on the trajectory path. From the simulation and experimental results, it can be concluded that the optimization technique could be used effectively for the trajectory planning of six-axis industrial manipulator in the joint space on the basis of minimum time-jerk-torque rate criteria. Originality/value: In this paper, a new approach based on hybrid multi-objective optimization technique by combining NSGA-II with ASF has been applied to find the minimal time-jerk- torque rate joint trajectory of a six-axis industrial robot for obtaining higher positional accuracy. The results obtained from the execution of algorithm have been validated through experimentation using Kawasaki RS06L industrial robot for a particular defined path.