Tailoring the dissolution rate and in vitro cell response of silicon nitride coatings through combinatorial sputtering with chromium and niobium. (27th May 2022)

• Record Type: Journal Article
• Authors: Skjöldebrand, Charlotte; Echeverri, Estefanía; Hulsart-Billström, Gry; Persson, Cecilia
• Is Part Of: Biomaterials science. Volume 10:Number 14(2022)
• Page Start: 3757
• Page End: 3769
• Publication Date: 2022-05-27
• Subjects: Biomedical materials -- Periodicals; 610.28
• DOI: 10.1039/d1bm01978c
• Languages: English
• ISSNs: 2047-4830

Abstract

Abstract : The addition of alloying elements, in particular chromium, reduced the dissolution rate of silicon nitride coatings without affecting other functional properties such as hardness. Optimum chromium contents gave an enhanced in vitro cell viability. Abstract : Ceramic coatings have been widely investigated as a means to reduce wear and metallic ion release from joint implants. Silicon nitride-based coatings have been a topic of interest specifically due to their solubility in aqueous solutions. This could imply a reduced adverse immune response since the generated debris would dissolve. However, there are concerns regarding the dissolution rate and adhesion of these silicon nitride-based coatings. This study attempts to address the concern of dissolution rate as well as coating adhesion of silicon nitride coatings. We hypothesized that alloying with chromium and niobium would affect the adhesion, dissolution rate, and the resulting ion release and cell response to the coatings. A combinatorial approach was used to deposit sputtered coatings with compositional gradients both with and without a CrN interlayer. Compositional gradients were achieved for all the investigated elements: Si (38.6–46.9 at%), Nb (2.2–4.6 at%) and Cr (1.9–6.0 at%). However, while the presence of an interlayer reduced the delamination during adhesion testing, the differences in composition in the top coating did not affect the adhesion. Nor did the top coating's composition affect the surface roughness or the coatings' inherent mechanical properties (elastic modulus and hardness). All coating compositions were associated with a low Co release from the underlying metal and points with a higher Cr content (4.3–6.0 at%) gave an overall lower release of Si, Cr and Nb ions, possibly due to the formation of a stable oxide, which reduced the dissolution rate of the coating. Optimum chromium contents were furthermore found to give an enhanced in vitro fibroblast cell viability. In conclusion, the results indicate a possibility to tailor the ion release rate, which lends promise to further investigations such as tribocorrosive tests towards a future biomedical application.